Complete 1B-100 Solar Wireless 4G Perimeter Alarm Kit (DA600+) with Wired Loud Siren

This Wireless 4G DA600+ Perimeter Alarm Kit is supplied with the following parts (but can also be expanded in many ways to suit different applications):

• 4 x sets of Long Range Solar Powered 1B Perimeter (laser) Beams.
• 1 x Wireless Receiver.
• 1 x KP9 4G Auto-Dialler (with remote controls).
• 1 x Loud 118 Decibel Wired Siren with 3 metres of Cable.

Compatible with all DA600+ Products !!

A complete Perimeter Alarm System to help you Monitor & Secure your Home & Business, ideal for DIY Installation (but can be expanded even more if required).

How it Works:

The 4 x sets of Beams are mounted to cover your Perimeter or vulnerable parts of your Perimeter, the Receiver & 4G Dialler are normally located inside your Home, Office, Garage etc.

If a person or vehicle passes through any of the Beams when the Dialler is Armed, the Internal Receiver will Chime, the Dialler will activate a built in Siren and the Wired Siren (for the pre-set durations) together with contacting Key-holders by Phone & Text.

• Battery Powered with Built in Solar Charging: (making for easy installation).
• Dual Detection Technology: (prevents false alarms from small animals and moving debris).
• Up to 100 metre Detection: (can be used closer).
• Impressive 900 metre Wireless Range (can be doubled by adding a signal repeater). 
• Quality Build.
• Supplied with Wall & Pole Mounting Brackets.
• Test Display & Eye Sighting: (for aid installation).
• Top up charging Ports.
• Option Test Beep (which can be silenced).

The Dual Detection Technology works by having a pair of Detectors (set 60 mm apart from each other) on each Beam, both Detectors have to be breached simultaneously to create an activation, allowing small animals, insects, leaves & debris to safely pass by.     

They also have an additional Charging Port which can be used to give the Beams a boost charge should you experience a lengthy duration of low sun light, or perhaps one of the beams needs to be fitted into a slightly covered location. You can also add an separate Solar Panel on any given Beam if it helps the charging or positioning options.

They are very easy to install as they have a display screen and a sighting lens to help installation.

You can use up to 128 sets of Beams with this Receiver & 32 sets should you decide to add a Solar Wireless Siren (part number 004-2810).

4G KP9 Auto-Dialler:

The KP 4G GSM Auto-Dialler is connected to the Wireless Receiver by a short length of bell cable (supplied) and communicates through mobile phone networks, a nano sized SIM Card needs to be fitted (not supplied but is available in the drop down above), you can use either PAYG or Contract.

The Dialler is packed full of features normally only associated with much more expensive systems including:

• 4G Model (operates on 2G, 3G & 4G Networks).
• Contacts up to 9 x Key-holders by Telephone & Text Message (optional).
• Built in Siren (adjustable duration from 1 to 999 seconds).
• Simple Plug in Power Supply with Back up Battery.
• Transformer Rating: 12v DC 1 amp.
• Can be used with a Wireless Siren (H/Duty).
• Easy to Program (using the built in keypad and LCD Screen or APP).
• Easy to Operate using:
  • Remote Control.
  • Built in Keypad.
  • Built in Timer.
  • Text Message.
  • APP.
• Many Modes of Operation including:
  • Full Arm.
  • Home Arm.
  • Entrance.
  • On Site.
  • Outer.
  • Inner.
  • 24 Hour (with Siren).
  • 24 Hour (silent).
• 2 x Wired Input Zones.
• 95 x Wireless Zones.
• Built in Power Failure (optional).
• Built in Temperature (optional).
• 2 x way Communication.
• Log (history) Logging.
• Low Battery Warning (of accessories).
• Optional APP (iOS or Android).
• 12 Language Menu (including English, French, German, Italian, Dutch & Spanish).

The secret to using a 4G Auto-Dialler with a Perimeter Alarm is to use the Dialler as the brains of the system, so if the Dialler is Armed the Alarm is Armed, if Disarmed the Alarm is OFF (although you can choose to use the built in chime on the wireless receiver to give a useful Alert).

The Dialler can be controlled by the following methods:

• Built in Keypad.
• Remote Control.
• Text Message.
• Built in Timer.
• APP.

Siren:

This Perimeter Alarm is supplied with a very loud 118 decibel 6-tone Siren and 3 metres of Cable (which can be easily extended), the Siren is connected into the KP9 4G Dialler, and would only work if the Dialler is Armed.

The 4G Control Panel can also in different ways helping you a return on the investment, examples below:

• Wireless Internal Burglar Alarm.
• Wireless Smoke Alarm.
• Temperature Monitor.
• Power Failure Monitor.
• Door Bell.
• 2-way Communication.
• Water & Flood Monitor.

You can add many additional accessories to this Perimeter Alarm system to suit your application including:

• Additional Perimeter Beams.
• PIR's & Door Contacts.
• External Wired & Wireless Sirens.
• Internal Sirens & Buzzers.
• Speech Alerts.
• Relays (for lighting).
• Flashing Lights.

*You can use up to 128 sets of Wireless Detectors with this single Alarm System*

If you require advice when building your system, please contact us for Friendly, No Obligation Advice !!

• 4 x Sets of Wireless 1B Perimeter Beams.
• 1 x Receiver & Plug in 3-pin Transformer (2-pin available upon request).
• 1 x Set of Brackets & Screws for the Beams.
• 1 x KP 4G GSM Auto-Dialler, 2 x Remote Controls & Plug in 3-pin Transformer.
• 1 x Wired 118 Decibel Siren & 3 metres of Cable.
• 1 x Set of Manuals.

Wireless Receiver Specification:

• Size: 160 (W) x 105 (H) x 35 (D) mm.
• Power Input: 12 - 15v DC 1 amp.
• Power Supply: 3-pin Plug in Transformer (2-pin available upon request).
• ON/OFF Button: Yes.
• Adjustable Volume Control: Yes.
• Channels: 4.
• Max sets of Beams per Channel: 32.
• Output Voltage: 12 - 12v DC.
• Output Voltage Duration: 2 seconds to 10 minutes.
• Built in Chimes: Yes (one per channel).
• Reminder Bleep: Yes (if programmed).
• Exit Delay: Yes 5 minutes (if programmed).
• Frequency: 434.6 MHz.
• Standby Current: 20 mA.
• Alarm Current: 180 mA.
• Relay Rating: 24v DC or 120v AC (2 amp).
• Relay Output Type: Momentary N/O or N/C.

KP9 4G Dialler Specification:

• 95 Wireless Channels (can be used with additional internal accessories).
• Contacts up to 9 x Key-holders by Telephone & Text Message (optional).
• Built in Siren (adjustable duration from 1 to 999 seconds).
• Power Supply: 3-pin Plug in Transformer (2-pin available upon request).
• Transformer Rating: 12v DC 1 amp.
• Back up Battery: Yes.
• Easy to Program (using the built in keypad and LCD Screen or APP).
• Easy to Operate using:
  • Remote Control.
  • Built in Keypad.
  • Built in Timer.
  • Text Message.
  • APP.
• Many Modes of Operation including:
  • Full Arm.
  • Home Arm.
  • Entrance.
  • On Site.
  • Outer.
  • Inner.
  • 24 Hour (with Siren).
  • 24 Hour (silent).
  • Not in Use.
  • Doorbell.
• 2 x Wired Input Zones.
• Built in Power Failure (adjustable 0 - 99 minutes).
• Built in Temperature (optional).
• Optional Wireless External Sirens. 
• 2 x way Communication.
• Log (history) Logging.
• Low Battery Warning (of accessories).
• 12 Language Menu (including English, French, German, Italian, Dutch & Spanish).
• Size: 190 (W) x 130 (H) x 25 (D) mm.
• GSM Frequency: FDD-LTE: B1/3/5/7/8/20 TDD-LTE: B38/70/B41 WCDMA: B1/5/8.
• GSM: 900/1800 (2G, 3G & 4G Networks).
• This Alarm operates on 2G, 3G & 4G Networks !!
• Wireless Accessories Frequency: 433.92 Mhz.
• Digital Output: N/O or N/C Dry Contacts (3A/240 AC).
• Sim Card Size: Nano Size.
• Built in Temperature Monitor: Yes (-20 - + 60 C).
• Back Up Battery: 3.7v-900mAH Li-ion Rechargeable.
• Colour: White.
• Push Buttons: Touch.
• Android APP: Yes.
• iOS: Yes.

Beam Specification:

• Size: 340 (H) x 123 (W) x 45 (D) mm.
• Power Supply: Re-chargeable AA Batteries.
• Mounting Methods: Wall or Pole.
• Detection Range: 100 metres.
• Transmission Range: 900 metres (line of sight).
• Frequency: 433 Mhz.
• IP Rating: IP66.
• Distance Between Detection Beams: 60mm.
• Qty of Detecting Beams: 1 set.
• Protected Height: 
• Charging Port: 9 - 12v DC (500 m/A to 1 amp).

Siren:

• Current Rating: 310 mA.
• Voltage: 12v DC.
• Length: 101 mm.
• Width: 96 mm.
• Sound Level: 118 dB.
• Colour: Black.
• Tone: 6-tone.