2B-100 Solar Wireless 4G Perimeter DA600+ Alarm System

Long Range Solar Powered Wireless Perimeter DA600+ 4G Alarm System with 900 metre Transmission & 100 metre Detection, supplied with:

• 1 x set of Long Range 2B Solar Powered Wireless Perimeter Beams.
• 1 x 4 x channel Wireless Receiver.
• 1 x 4G KP9 Auto-Dialler & 2 x Remote Controls.

Compatible with all DA600+ products !!

A 4G Perimeter Alarm System to help you Monitor & Secure your Home & Business, ideal for DIY Installation (but can be expanded even more if required).

How it Works:

The set of 2B Beams are mounted to cover part of your Perimeter (or the most vulnerable part of your Perimeter), the Receiver & Dialler are normally located inside your Home, Garage, Office (or nearby building which has a power supply and mobile phone signal).

If a person or vehicle passes through the Beams (when the Dialler is Armed), the Internal Receiver will Chime, the Dialler will activate a built in Siren and start to contact Key-holders by Phone & Text.

Receiver:

The Indoor 4 - Channel Wireless Receiver is powered by a standard 3-pin Plug in Transformer and has the following features:

• 4 x Adjustable Dry Relay N/O or N/C Outputs (often used to trigger auto-diallers, timer relays).
• Adjustable 12v DC Outputs (often used with sirens & flashing lights).
• ON/OFF Switch.
• 5 minute Exit Delay (using the remote controls or receiver).
• Volume Control.
• Will work with up to 128 sets of Detectors.
• Optional Reminder Bleeps.
• Exit Delay Option.

These impressive 2B Solar Powered Wireless Perimeter Beams (often called laser beams) are packed with impressive features listed below: 

• Battery Powered with Built in Solar Charging: (making for easy installation).
• 2 x Dual Detection Technology Beams: (prevents false alarms from small animals and moving debris).
• 100 metre Detection: (covers more with with less detectors).
• Impressive 900 metre Wireless Range (this can be doubled by adding a signal repeater): 
• Quality Build.
• Supplied with Wall & Pole Mounting Brackets.
• Test Display & Eye Sights (for help installation).
• Top up charging Ports.

The Dual Detection Technology works by having a pair of Detectors (set 60 mm apart from each other) on each Beam, both Detectors have to be breached simultaneously to create an activation, allowing small animals, insects, leaves & debris to safely pass by. 

These 2B Beams have two pairs of these Dual Detectors which are located 260 mm apart from each other resulting in two invisible detection Beams set 260 mm apart. 

The External Beams are also supplied with an additional Charging Port which can be used to give the Beams a boost charge should you experience a lengthy duration of low sun light, or perhaps one of the beams needs to be fitted into a slightly covered location. 

It is also possible to add a separate Solar Panel onto any of the Beams if this helps with charging or positioning of the Beams.

The Beams also have an optional built in Siren which will activate every time someone walks through the Beams, this can be a great feature when the Beams are being used as safety Beams (protecting dangerous locations) or as simple Visitor Alerts, it can also be turned OFF for when the Beams are being used purely as a Perimeter Intruder Alarm ensuring silence when in use. 

They are very easy to install as there is a Display Screen and Eye Sighting Lens.

Operating Range:

The Wireless operating range between the Beams & Receivers is 900 metres (line of sight) which equates to around 400 - 600 metres in nearly all applications, however this can also be doubled by using the signal repeater (part number 004-2910).

4G KP9 Auto-Dialler:

The KP9 4G Auto-Dialler is connected to the Wireless Receiver by a short length of bell cable (supplied) and communicates through mobile phone networks, a nano sized SIM Card needs to be fitted), you can use either PAYG or Contract (no data is required).

The 4G Dialler operates on the 4G networks but can also still operate on 3G & 2G  making it more reliable, it is packed full of features including:

• Contacts up to 9 x Key-holders by Telephone & Text Message (optional).
• Built in Siren (adjustable duration from 1 to 999 seconds).
• Simple Plug in Power Supply with Back up Battery.
• Transformer Rating: 12v DC 1 amp.
• Can be used with a Wireless Siren (H/Duty).
• Easy to Program (using the built in keypad and LCD Screen or APP).
• Easy to Operate using:
  • Remote Control.
  • Built in Keypad.
  • Built in Timer.
  • Text Message.
• Many Modes of Operation including:
  • Full Arm.
  • Home Arm.
  • Entrance.
  • On Site.
  • Outer.
  • Inner.
  • 24 Hour (with Siren).
  • 24 Hour (silent).
• 2 x Wired Input Zones.
• 95 x Wireless Zones.
• Built in Power Failure (optional).
• Built in Temperature (optional).
• 2 x way Communication.
• Log (history) Logging.
• Low Battery Warning (of accessories).
• Optional APP (iOS or Android).
• 12 Language Menu (including English, French, German, Italian, Dutch & Spanish).

The secret to using a 4G Auto-Dialler with a Perimeter Alarm is to use the Dialler as the brains of the system, so if the Dialler is Armed the Alarm is Armed, if Disarmed the Alarm is OFF (although you can choose to use the built in chime on the wireless receiver to give a useful Alert for when you are within the premises).

The Dialler can be controlled by the following methods:

• Built in Keypad.
• Remote Control.
• Text Message.
• Built in Timer.
• APP.

The GSM Control Panel can also in different ways helping you a return on the investment, examples below:

• Wireless Internal Burglar Alarm.
• Temperature Monitor.
• Power Failure Monitor.
• Door Bell.
• 2-way Communication.
• Water & Flood Monitor.

You can add many additional accessories to this Perimeter Alarm system to suit your application including:

• Additional Perimeter 1B or 2B Beams (2 x sizes).
• Outdoor PIR's (solar or battery).
• Door Contacts.
• Gate Sensors.
• External Wired & Wireless Sirens.
• Internal Sirens & Buzzers.
• Speech Alerts.
• Relays (for lighting).
• Flashing Lights.

*You can use up to 128 sets of Wireless Detectors with this single Alarm System*

If you require advice when building your system, please contact us for Friendly, No Obligation Advice !!

• 1 x Set of Wireless 2B Perimeter Beams.
• 1 x Receiver & Plug in 3-pin Transformer (2-pin available upon request).
• 1 x Set of Brackets & Screws for the Beams.
• 1 x KP9 4G Auto-Dialler, 2 x Remote Controls & Plug in 3-pin Transformer.
• 1 x Set of Manuals.

Wireless Receiver Specification:

• Size: 160 (W) x 105 (H) x 35 (D) mm.
• Power Input: 12 - 15v DC 1 amp.
• Power Supply: 3-pin Plug in Transformer (2-pin available upon request).
• ON/OFF Button: Yes.
• Adjustable Volume Control: Yes.
• Channels: 4.
• Max sets of Beams per Channel: 32.
• Output Voltage: 12 - 12v DC.
• Output Voltage Duration: 2 seconds to 10 minutes.
• Built in Chimes: Yes (one per channel).
• Reminder Bleep: Yes (if programmed).
• Exit Delay: Yes 5 minutes (if programmed).
• Frequency: 434.6 MHz.
• Standby Current: 20 mA.
• Alarm Current: 180 mA.
• Relay Rating: 24v DC or 120v AC (2 amp).
• Relay Output Type: Momentary N/O or N/C.

4G KP9 Dialler Specification:

• 95 Wireless Channels (can be used with additional internal accessories).
• Contacts up to 9 x Key-holders by Telephone & Text Message (optional).
• Built in Siren (adjustable duration from 1 to 999 seconds).
• Power Supply: 3-pin Plug in Transformer (2-pin available upon request).
• Transformer Rating: 12v DC 1 amp.
• Back up Battery: Yes.
• Easy to Program (using the built in keypad and LCD Screen or APP).
• Easy to Operate using:
  • Remote Control.
  • Built in Keypad.
  • Built in Timer.
  • Text Message.
  • APP.
• Many Modes of Operation including:
  • Full Arm.
  • Home Arm.
  • Entrance.
  • On Site.
  • Outer.
  • Inner.
  • 24 Hour (with Siren).
  • 24 Hour (silent).
  • Not in Use.
  • Doorbell.
• 2 x Wired Input Zones.
• Built in Power Failure (adjustable 0 - 99 minutes).
• Built in Temperature (optional).
• Optional Wireless External Sirens. 
• 2 x way Communication.
• Log (history) Logging.
• Low Battery Warning (of accessories).
• 12 Language Menu (including English, French, German, Italian, Dutch & Spanish).
• Size: 190 (W) x 130 (H) x 25 (D) mm.
• GSM Frequency: FDD-LTE: B1/3/5/7/8/20 TDD-LTE: B38/70/B41 WCDMA: B1/5/8.
• GSM: 900/1800 (2G, 3G & 4G Networks).
• This Alarm operates on 2G, 3G & 4G Networks !!
• Wireless Accessories Frequency: 433.92 Mhz.
• Digital Output: N/O or N/C Dry Contacts (3A/240 AC).
• Sim Card Size: Nano Size.
• Built in Temperature Monitor: Yes (-20 - + 60 C).
• Back Up Battery: 3.7v-900mAH Li-ion Rechargeable.
• Colour: White.
• Push Buttons: Touch.
• Android APP: Yes.
• iOS: Yes.

Beam Specification:

• Beam Size: 590 (H) x 123 (W) x 45 (D) mm.
• Power Supply: Re-chargeable AA Batteries.
• Charging Method: Built in Solar Panels.
• Mounting Methods: Wall or Pole.
• Detection Range: 100 metres.
• Transmission Range: 900 metres (line of sight).
• Frequency: 433 Mhz.
• IP Rating: IP66.
• Distance Between Detection Beams: 60mm.
• Number of Beams: 2 sets.
• Charging Port: 9 - 12v DC (500 m/A to 1 amp).
• Built in Buzzer: Yes (turn on with 1 - 6 presses of button, off 7 or 8 times).
• Buzzer OFF (7 with immediate reset, 8 with 3 minutes battery saving reset).

Easy Programming Method of Beams to Receiver:

1. Turn On Beams (switch on rear).
2. Mount the Beams.
3. Line up By Eye, String Line etc.
4. Put the relevant Receiver into Learn Mode.
5. Walk through the Beams, at this time (providing you have them correctly lined up), a low red glow will illuminate briefly.
6. The Signal sent to the Receiver from this set of beams will be learned into the relevant receiver.
7. Take the Receiver out of learn mode.
8. The system is now ready.

4G Auto-Dialler Programming:

• Best carried out after the Beams are programmed to the Receiver (see above).
• Connect Receiver to Dialler using Bell Cable (often done by us before despatch).
• Insert SIM Card.
• Connect and plug in the Power Supply.
• Turn ON (switch in back).
• Use Keypad to carry out the relevant programming.