Sale! Stand-alone 4G GSM UltraDIAL Perimeter Alarm with Siren Kit 2

No Power Required 4G GSM Wireless Perimeter Alarm with Siren Kit 2

004-2450

New

Our unique stand-alone Silent Battery 4G GSM Wireless Perimeter Alarm Kit 2 supplied with two sets of Solar Laser Beams connected to Wireless Transmitters, a Battery powered UltraDIAL 4G GSM Dialler & 1 x large independent Solar Siren. For locations with No Power !!

 

More details

Operates on 4G, 3G & 2G Networks !! | Please note: out of stock

1 262,51 €

(including 23% vat)
100% secure payment

Our unique stand-alone Battery powered 4G GSM Wireless Perimeter Alarm supplied with:

  • 2 x sets of Solar Laser Beams (can be mounted up to 100 metres apart).
  • 2 x Wireless Transmitters (connected to the Beams by cable).
  • 1 x Battery powered UltraDIAL Wireless 4G GSM Dialler (would be hidden away out of sight).
  • 1 x Wireless Solar Powered Siren (can be fitted well away from the Beams & Dialler).

4G Perimeter Alarm

For locations with No Access to a Power Supply, and allowing the GSM Dialler to be safely hidden away, it will silently contact key-holders by Phone & SMS !!

The Alarm is Armed & Disarmed using Remote Control from up to 100 metres away. 

How it works:

The two sets of Laser Beams are powered by built in lithium batteries which are charged and maintained by the built in Solar Panels, they need to be mounted (lined up to each other) up to 100 metres away (can be less) using the brackets supplied. The Beams have a pair of invisible infrared Beams (60 mm apart) both need to be breached at the same time (this avoids false alarms from small animals).

Perimeter Beams

One of the Beams within each set is supplied with a twin core cable which is connected into a Battery powered Wireless Transmitter which would normally be fitted onto the back of a Post. 

The UltraDIAL 4G Dialler is fully weatherproof (IP66) and powered by 3 x lithium AA Batteries and would be hidden away up to 30 - 40 metres away from the Beams.

The 4G UltraDIAL & Beams are Armed or Disarmed using the Remote Control supplied (further remote controls can be purchased) from up to 100 metres away.

Remote Control

When triggered the Alarm will silently contact up to three key-holders by Telephone (with your personal pre-recorded message) and SMS. You can select to turn the calls or text message off during programming, at the same time the independent Solar Siren will activate if it has been Armed.

Solar Siren:

This Solar powered Solar Siren can be mounted up to 900 metres (line of sight) away from the Beams, which equates to around 400 - 600 metres in most applications, this allows you to place it away from the Beams if required.

Solar Siren

The Siren which also has a Bright Flashing LED which is Armed & Disarmed using a different set of Remote Controls and can be used in different ways depending on what has been chosen during the initial set up, these include:

  • Siren & Strobe (when the 4G UltraDIAL is activated).
  • Siren & Strobe (when the 4G UltraDIAL is OFF).
  • Chime & Strobe (when the 4G UltraDIAL is activated).
  • Chime & Strobe (when the 4G UltraDIAL is OFF).

Some customers will simply use the Siren well away from the Beams as a Visitor Alert, others will use it as an Intruder Alarm deterrent, you are in full control using the Remote Controls supplied. 

This unique Perimeter Alarm allows you to protect up to 100 metres in even the most remote locations provided you do have a mobile signal on site, ideal for:

  • Yards.
  • Gateways.
  • Vacant Buildings.
  • The list is endless.

Communication:

The Alarm communicates via the mobile phone networks (nano sim card required), it will contact up to three key-holders by Telephone (with your own pre-recorded message) & Text Message when activated.

We recommend using a SIM Card with a Network from the Country that the device will be used.

Contacting Key-holders:

The Alarm will contact between 1 & 3 key-holders (depending on how you have chosen to program the alarm) by Telephone & SMS (either can be turned off whilst programming the alarm) when activated.

It will normally take take between 30 - 60 seconds to call the first key-holder as the battery wakes up (this can vary depending on the mobile phone networks at the time).  

Recording Message:

You can record a 30 second message into the Alarm, which will be replayed to the key-holders when the Alarm calls them.

4G UltraDIAL

Arming & Disarming:

The Alarm is Armed & Disarmed by using the Remote Control from up to 100 metres away, up to 9 Remote Controls can be used with each Alarm. 
There is a 30 second Exit Delay built into the Alarm for easy use.

Receiving a Call:

When the Alarm calls the key-holders, there is the choice to:

  • Listen to your pre-recorded message and do nothing (the alarm will contact the other key-holders).
  • Listen to your pre-recorded message and press # on your telephone (this will disarm the UltraDial and prevent it from calling further key-holders).
  • Listen to your pre-recorded message and press * on your telephone (this will prevent it from calling further key-holders, but keep the Alarm fully armed (ready for further activations).

Wireless Transmitter:

The Wireless Transmitters supplied connected to the Beams are powered by a CR2 Lithium Battery and are mounted inside a weatherproof mounting box, the transmission range back to the UltraDIAL is 100 metres (line of sight) which equates to around 30 - 40 metres in most applications).

The box is designed for easy and quick installation.

Additional Beams:

It would be possible to add additional sets of Beams with Wireless Transmitters to this Alarm, all connecting to the 4G GSM UltraDIAL Dialler.

1B Beams

Wireless Alarm Detectors:

It is possible to add additional Wireless Sensors into the UltraDIAL should you have buildings nearby (20 - 40 metres away) that you want to also protect, these include:

  • Battery PIR's with Built in Sirens (007-0200).
  • Battery PIR's with a Hood & Siren (007-1410).
  • Battery Wireless Door Contact (007-0260).

Easy Programming:

It is very easy to program, probably the easiest GSM Alarm to program on the market today by using the small built in keypad, following some very simple instructions.

Keypad 4G UltraDIAL

Weatherproof:

The 4G UltraDIAL is fully weatherproof and rated at IP66 - Refer to manual for correct installation, so can be used in most locations, it is not however designed to be submerged.

Weatherproof UltraDIAL 4G

Low Battery:

The Alarm will send the primary key-holder a SMS (text message) if the batteries are getting low.

Status Report:

A status report can be obtained by sending the device a Text Message.

Security Screws:

The lid is fitted with 4 x security screws and a tool is supplied as standard.

Full Beam Information:

The 'R' Beam within each set is supplied with a N/O & N/C Output Cable which is connected into the Wireless Transmitter (which we do for you before sending the goods), the second Beam within each set have no cable connections.

The Beams also have the built in Wireless Transmitter which will trigger the Wireless Siren (004-2810) but can also be used with an indoor Receiver from up to 900 metres away (line of sight), ideal for customers wanting to possibly move the Beams between different locations and applications.

The Dual Detection Technology works by having a pair of Detectors (set 60 mm apart from each other) on each Beam, both Detectors have to be breached simultaneously to create an activation, allowing small animals, insects, leaves & debris to safely pass by. 

The Beams are supplied as a pair together with mounting brackets, they need to be installed in such a way that they are facing each other up to a maximum of 100 metres apart.

They are easy to line up using the built in screen together with the option of having a low audible beep a few seconds after being breached (which some customers like to keep turned on), while some customers use this feature during the initial set up mode.

The Beams are powered by built in lithium batteries which are charged and maintained by the built in Solar Panels, the Solar Panels require daylight to function, suitable for most outdoor applications.

There is an optional rear mounted charging point for customers who may have to fit one or both beams in the shade, these could then have a maintenance charge a few times a year using a plug in transformer or battery pack.

A unique Perimeter Alarm, Please Contact Us for Advice !!

If you need assistance in selecting the right product for your personal needs or support after making a purchase, please do not hesitate to contact us:
Contact us
Our opening times: Monday-Friday 8:00am-5:00pm
  • 2 x sets of 1B Beams (with cable connection).
  • 2 x sets of Beam mounting Brackets.
  • 2 x Wireless Transmitters inside Mounting Boxes.
  • 1 x UltraDIAL 4G Alarm & Remote Control.
  • 1 x Large Solar Siren & 2 x Remote Controls.
  • 3 x Lithium AA Batteries.
  • 1 x Manual.
  • 1 x Tool.

UltraDIAL:

  • Battery Power: 3 x Lithium AA Batteries (supplied).
  • Battery Life: 6 months in most applications).
  • Main Power: Yes (optional 5v DC plug in transformer).
  • Programming Method: Easy Built in Keypad.
  • Wireless Transmission Range: 100 metres.
  • Size: 160 (L) x 82 (W) x 42 (D) mm.
  • Colour: Black.
  • Wired Inputs: Yes (1 x Volt Free N/O or N/C).
  • Cable Entry: 2 x Glands.
  • Wireless Inputs: Yes (Wireless PIR's & Door Contacts).
  • Wireless Outputs: Yes (Internal & External Sirens, PIR's).
  • Operates on 4G, 3G & 2G Networks.
  • SIM Card Required: Yes (nano size).
  • Calls Key-holders: Yes (maximum of three, which can be turned off).
  • Sends Key-holders SMS: Yes (maximum of three, which can be turned off).
  • Built in Siren: No (designed as a covert alarm).
  • Mounting Method: 2 x Screw Holes in Flange.
  • Weatherproof: Yes (IP66 - Refer to manual for correct installation).
  • Arming & Disarming Method: Remote Control, Keypad, Receiving A Call.
  • Remote Operation on Battery: Yes (# to Disarm, * to Stop & Remain Armed).
  • Remote Operation on Mains:  Yes (# to Disarm, * to Stop & Remain Armed, SMS to Arm, SMS to Disarm).
  • Power Failure Notification: Yes (when used with a plug in transformer).
  • Weekly Status Report: Yes (can be turned off).
  • Low Battery Notification: Yes (to primary key-holder).
  • Recording Message: Yes (this will be replayed to the key-holders when the alarm calls them).
  • Frequencies:
    • LTE-TDD B38/B40/B41.
    • LTE FDD B1/B3/B5/B7/B8/B20/B28.
    • UMTS/HSPA+ B1/B8.
    • GSM/GPRS/EDGE 900/1800 MHz.

 

Beams:

  • Beam Size: 340 (H) x 123 (W) x 45 (D) mm.
  • Output Type: Momentary N/O or N/C.
  • Cable Length: 800 mm (2-core).
  • Power Supply: Re-chargeable AA Batteries.
  • Charging Method: Built in Solar Panels.
  • Mounting Methods: Wall or Pole.
  • Detection Range: 100 metres.
  • Wireless Transmission Range: 900 metres (line of sight).
  • Frequency: 433 Mhz.
  • IP Rating: IP66.
  • Distance Between Detection Beams: 60mm.
  • Number of Beams: 1 set.
  • Charging Port: 9 - 12v DC (500 m/A to 1 amp).

Wireless Transmitter:

  • Wireless Transmission Range to UltraDIAL: 100 metres (line of sight).
  • Transmitter Power Supply: 1 x CR2 Lithium Battery (included).
  • Transmitter Size: 52 x 32 x 12 mm.
  • Mounting Box: Plastic (with 4 x easy pre-drilled holes).
  • Box Size: 113 (W) x 153 (H) x 53 (D) mm.
  • Cable Length (between beams and transmitter): 800 mm (can be shortened or lengthened).
  • Trigger Type: N/C.
  • Weatherproof: IP65.

Solar Siren:

  • Size: 280 x 180 x 74 mm.
  • Siren Options:
    • Chime & Strobe Alert Mode.
    • Full Siren & Flashing Strobe.
  • Siren Level: 90 decibel.
  • Siren Duration: 1 minute (in alarm mode).
  • LED Illumination: 70 lm.
  • Wireless Working Range to Remote Control: over 100 metres (line of sight).
  • Wireless Working Range to Perimeter Beams: 500 - 900 metres (line of sight).
  • Mounting Method: Rear Plate.
  • Built in Battery: 3000mAH 6.4v.
  • Battery Type: Lithium.
  • Frequency: 433 MHz.
  • Working Temperature: -30 - +70.