Wireless Smart Alarm Water Detector

Water Detector for the Wireless Smart Alarms

005-3540

New

Wireless Water Detector, designed to monitor for Water Leaks & Floods, works in conjunction with all of our Wireless Smart Alarm Systems. 

More details

Please note: out of stock

40,67 €

(including 23% vat)
100% secure payment

Wireless Water Detector, designed to monitor for Water Leaks & Floods, works in conjunction with all of our Wireless Smart Alarm Systems. 

The battery powered transmitter should be mounted in a position above the potential water leak, with the Water Sensor/Probe located in a position very close to the most likely location that water would collect following a leak (it is attached to the transmitter by a 220 mm cable, which could be extended if needed).

The transmitter is installed using small screws or double sided tape (both supplied), the sensor is mounted using a double side strong adhesive pad (supplied).

The transmitter is powered by 2 x AAA batteries (supplied), and would last between 1 - 2 years in most applications, there is a built in Low Battery Warning (slow red flashing LED on the transmitter) to inform the home owner that the batteries need replacing.

The Wireless Transmitterand has a very impressive wireless range of 200 metres (line of sight) back to any of the Wireless Smart Alarm Control Panels.

There is no limit to how many Wireless Water Detectors are used with any Wireless Smart Alarm Systems.

This can be used with the chosen Smart Alarm Control Panel as a pure Water Alarm, or as part of a wider Security & Safety System.

If you need assistance in selecting the right product for your personal needs or support after making a purchase, please do not hesitate to contact us:
Contact us
Our opening times: Monday-Friday 8:00am-5:00pm
  • 1 x Water Detector & Transmitter.
  • 2 x AAA Batteries.
  • 1 x set of Double Sided Tape & Mounting Screws.
  • 1 x Manual.
  • Frequency: 868 Mhz.
  • Wireless Transmission Distance: 200 metres (line of sight).
  • Power: 2 x AAA batteries (supplied).
  • Distance between Transmitter & Water Sensor: 220 mm (could easily be extended).
  • Mounting Method: Screws or Double Sided Tape (supplied).
  • Size of Wireless Transmitter: 85 x 40 x 15 mm.
  • Size of Water Sensor/Probe; 25 x 7 x 15 mm.
  • Distance between Probes: 16 mm.
  • Battery Life: 1 - 2 years (normal operation, depending on usage).
  • Low Battery Warning: Yes (slow red flashing LED on the magnetic contact).