Internal PIR for the Wireless Smart Alarm
Internal Wireless Smart Alarm PIR, detects people from up to 15 metres distance & 110 degrees angle, with a wireless transmission range of 150 metres (line of sight) back to the Control Panel.
Recipient :
* Required fields
or Cancel
005-3520-00
New
Internal Wireless Smart Alarm PIR, detects people from up to 15 metres distance & 110 degrees angle, with a wireless transmission range of 150 metres (line of sight) back to the Control Panel.
This product is no longer in stock
Availability date:
Internal Wireless Smart Alarm PIR, detects movement from people from up to 15 metres distance & 110 degrees angle, together with a wireless transmission range back to any of the Smart Control Panels of 150 metres (line of sight).
Powered by a single PP3 battery (supplied) and supplied with a fully adjustable mounting bracket.
The battery will operate for between 12 - 18 months in most applications (depending on use) and has a built in low battery warning (a slow flashing red LED on the PIR) allowing for suitable battery replacement. The built in power saving technology puts the PIR into hibernation for 3 minutes after each activation.
There is no limit to how many additional PIR's can be added to our range of Wireless Smart Alarms.
Mounting the PIR Sensor:
The key to successful operation of any PIR sensor is choosing the correct location. A sensor mounted in a unsuitable location has the potential to cause false triggers and reduce performance. The main rules that should be followed are:
1) Mount the PIR into a corner of a room.
2) Avoid heat spots from bright lamps suddenly turning on or off.
3) Do not install immediately above a radiator.
4) Do not install in a glass roof conservatory.
Wireless Remote Control, for arming and disarming your Wireless Smart Alarm, from up to 50 metres away.
Wireless Water Detector, designed to monitor for Water Leaks & Floods, works in conjunction with all of our Wireless Smart Alarm Systems.
Additional Wireless Security Floor Pressure Mat, designed to be placed underneath a doormat, when anyone stands on the doormat, a wireless signal is transmitted back to a Wireless Smart Alarm Control Panel, the panels can be programmed to chime or go into a full alarm mode.
Dummy Alarm Siren & Flashing LED, exactly matching the fully operational Wireless Smart Alarm Siren, ideal addition to any Alarm Installation, or used as a simply deterrent on any building.
Battery Powered Wireless Siren & Flashing Strobe, ideal addition to all installations, quick & easy to install. Works with all of our Wireless Smart Alarm Control Panels.
Unique Wireless Siren Monitoring Sensor, designed to monitor existing Smoke, Gas & Carbon Monoxide Alarms, ideal for ensuring that the correct & legal Sensors are being used whilst still being able to connect it your your Wireless Smart Alarm System.
Battery powered Wireless Keypad used to Arm & Disarm all of the Wireless Smart Alarm Systems, ideal for applications with multiple users, or where using a remote control is not practical (only three left in stock).
Outdoor Wireless PIR for use with the complete range of Smart Wireless Alarms, supplied with a protective rubber hood which results in a tighter detection pattern helping it avoid false alarms from small animals.
A protective Steel Cage A designed to help protect various Security devices from Damage or Theft.
PIR (passive infra-red detector)
All PIR sensors detect changes in infra-red radiation, in the form of heat emitted by a number of bodies including people, cars and to a lesser extent, dogs or other small animals. The bigger the body, the more infra-red radiation isemitted and the easier it is for a PIR sensor to detect.
If you imagine the images shown on television of a Police Helicopter following a suspect in the pitch black using night vision technology or a Soldier looking through night vision binoclulars in the middle of the night, this is exactly how the PIR is working.