Galvanised 76 mm Diameter Removable Security Post & Chain Eyelet (001-2620 K/D, 001-2610 K/A)

Galvanised Removable Round Section Security Post, 76 mm Diameter, 900 mm High with a top mounted Chain Eyelet, it is locked firmly into place using a Padlock (supplied).

Please Note:

These Posts are brand new, fully functional but have the Top Mounted Chain Eyelets welded on at different angles, therefore being sold at a discount.

The ground spigot would be fitted into the ground (using cement or post mix) with the top lid being flush to (or just above) the ground. The spigot has a hinged top lid which completely covers up the access hole when the Post is not in use, this makes it safe for locations where the Public or Staff may have access or low vehicles need to pass over.

The Post is locked into the ground spigot with the Padlock supplied (keyed alike available for multiple installations).

The Bollard stands an impressive 900 mm high when fitted into the ground spigot, and has a top mounted Eyelet which are often used with lengths of Chain.

Galvanised finish (inside and out), can also be used in conjunction with matching: 

• Bolt Down Static Bollards.
• Spigot designed Static Bollards.
• Fold Down Bollards.

• 1 x Removable Galvanised Security Post.
• 1 x Ground Spigot.
• 1 x Padlock (keyed to differ). 

• Diameter: 76 mm.
• Overal Height: 1.2 metre (including spigot).
• Height of Post from Spigot: 900 mm.
• Height of Ground Spigot: 290 mm.
• Ground Spigot Hinged Lid: Yes.
• Top Eyelet: YES (Internal Diameter 23 mm).
• Colour: Galvanised.
• Coating: Galvanised (inside and out).
• Material: Steel.
• Locking Method: Padlock (supplied).
• Padlock Key Options: Keyed to Differ (std) or Keyed Alike (optional).
• Overal Package Weight: 6.5 Kilo.
• Weight of Lift Out Post: 4.0 Kilo.
• Top End Caps: 2 (designed to cover up holes that were used to allow galvanising to fully coat the inside).