Wireless DA600+ Latching Siren Assembly with Adjustable Siren & Blue Flashing LED

DA600+ Long Range Wireless Panic Alarm Assembly with a built in latching adjustable Siren & Blue Flashing LED, used in Panic Alarm Systems.

This Siren & Flashing Strobe Assembly will latch ON when triggered and requires at least one Reset Button for correct operation, the options include:

• 300 metre Wireless Push Button, ref 004-2940.
• 900 metre Wireless Push Button, ref 006-2200.
• Or we can fit a physical switch on the assembly for applications where it is safe to do so (for example if the assembly is located in a manned office or reception), please Contact Us for Advice.  

The transmission range from a suitable Transmitter is from 300 metres to 900 metres (line of sight) depending on which transmitter is chosen (most are 900 metre), this can be at least doubled by adding the Signal Repeaters (004-2910).

There are many Transmitters that can be used with this Wireless Siren Box, these include:

• 900 metre Single Push Button (006-2200).
• 900 metre Single Push Button & Lanyard (006-2220).
• 900 metre Double Push Button (006-2210).
• 900 metre Double Push Button & Lanyard (006-2230). 
• 300 metre Under Desk Button (004-2940).
• 900 metre Large Red SOS Wireless Push Buttons.
• 900 metre Large Red Lockdown Wireless Push Buttons.
• 900 metre Large Red Help Wireless Push Buttons.
• 900 metre Large Red Assistance Wireless Push Buttons.
• 900 metre Please Ring Wireless Push Button Assembly (006-2800).
• 1B - 2B - 3B Perimeter Beams.
• 900 metre & 600 metre PIR's.
• Internal Curtain & Standard PIR's.

The unique Built in Siren has 32 available Tones together with Volume Control allowing you to utilize the Control Box for your individual requirements. 

It is powered by a plug in transformer, which can be connected into a fused spur (recommended), we also offer the option of including a Back Up Power Supply for applications wanting to ensure the system works throughout a Power Cut, the UPS would be separate to the Siren Box.

Operation:

In the event of an activation from a Transmitter, the Siren & Flashing LED will Latch ON until reset.

Additional Siren Boxes:

You can add as many Siren Control Boxes to your System as required (no limit), each one can be adjusted to suit the exact location of its installation, you may wish to have some a very with low volume and a flashing LED whilst others set to be loud.

It is also possible to connect a wired Siren & Flashing Strobe Boxes to each Wireless Siren Box for applications where rooms may be back to back. 

Installation:

These Wireless Siren Alarm Panels are designed for easy installation, they will be fully prepare before  despatch, all the customer needs to do is:

• Mount the Control Box (handy lugs for easy & quick fitting).
• Pair the Box to the chosen Panic Buttons (new systems would be done before despatch).
• Power the Control Box.
• Choose the Siren Tone & Volume (simple and quick adjustments).
• Test.

Compatible with all DA600+ Wireless Alarm Systems !!

• 1 x 'S' Type Wireless Receiver.
• 1 x Adjustable Siren.
• 1 x Latching Relay.
• 1 x Flashing Blue LED.
• 1 x Mounting Box.

• Size: 225 x 190 x 67 mm (not including Strobe).
• Box Material: Plastic.
• Box Mounting Method: Handy Mounting Lugs with Pre-drilled Holes.
• Wireless Operating Range: 300 - 900 metres - line of sight (depending on the chosen transmitter).
• Repeater Option: Yes (available as an optional option).
• Siren: Adjustable in Tone (32 options) & Volume Control.
• Volume Level: 106 Decibel to Zero.
• Receiver: 'S' Type.
• Flashing Strobe: Blue.
• Duration of Siren & Flashing Strobe LED: Latches ON (until reset).
• Power Supply: Plug in 3-pin Transformer (can be used with spur socket), 2-pin available upon request.
• Backup Battery: No (available as an optional option).
• Weatherproof: Yes.

Latching Relay: 

• Size: 66 (L) x 43 (W) x 20 (H) mm.
• Input voltage is12 or 24v DC.
• Output rating to 240v AC/8 amp.
• Output Relays: Double pole changeover.
• Reset Method: Power ON/OFF or N/O Switch.