800 metre Wireless Test Kit

800 metre Wireless Test Kit

009-1990

New

A Sale & Return (two week loan) 800 metre Wireless Test Kit from Ultra Secure Direct (subject to availability).

More details

241,08 €

(including 23% vat)
100% secure payment

14 day Sale & Return (loan) 800 metre Wireless Test Kit from Ultra Secure Direct which allows customers to carry out on site tests before purchasing a Wireless Bespoke Alarm System.

Although Ultra Secure carry out full testing on all Wireless Equipment before advertising the Wireless operating range, this testing is done in open air, as is all manufacturing testing.

Obviously, many seen and unseen obstructions inside any building can affect the true Wireless Operating Range of all Wireless Equipment, therefore having the chance to carry out some quick and simple testing can benefit all parties.

How It Works:

  1. For customers wishing to test the environment before purchase, please purchase this Test Kit by Telephone.
  2. Carry Out Testing (basic instructions supplied and shown below).
  3. After (or during the tests) contact Ultra Secure by Telephone (01604 589414) or Email (info@ultrasecuredirect.com) to discuss results.
  4. After Testing return the Test Kit (within 14-days) to Ultra Secure to egt a Full Refund.
  5. Please Note: A Refund will only be given if the Test Kit is returned in 14-days and in good condition as it will be required by other customers.

Many variations are possible when Ultra Secure design bespoke Alarm Systems for Customers (including Signal Repeaters), therefore, these test results are very valuable to us.

Process:

  1. Locate the Control Box in the desired location and Power Up (using the transformer attached).
  2. Press the Test Button on the Call Button in the same room (checking the Red LED illuminates on the Call Button) to ensure the Receiver is powered, the Test LED should illuminate on the Control Box and remain on, once tested press the Reset Button on the Control Box (the LED should go out).
  3. Walk to each location with the Call Button and Press, check back on the Control Box to see if the LED on the Receiver is ON, press Reset Button and repeat the process to test other locations.
  4. If you cannot get full transmission results, move the Test Control Box to other locations to Test.
  5. Contact Ultra Secure to Discuss Results (Tel: 01604 589414 or Email info@ultrasecuredirect.com).
  6. Return Test Kit for a Full Refund within 14-days.

Please Note:

  • Please Order via Telephone (01604 589414, option 1) to ensure we have Stock available.
  • We have set a 14-day Return Policy to allow as many customers as possible to benefit from this Test Kit.
  • This offer is subject to availability as we only have a limited stock of loan kits, if one is not available at the time of order we would contact you to arrange approximate dates.
If you need assistance in selecting the right product for your personal needs or support after making a purchase, please do not hesitate to contact us:
Contact us
Our opening times: Monday-Friday 8:00am-5:00pm
  • 1 x Push Button Assembly.
  • 1 x Control Box & 3-pin Plug in Transformer.
  • Wireless Operating Range: 800 metres (line of sight).
  • Test LED on Push Button: Yes.
  • Test LED on Control Box: Yes (latching).
  • Reset Button on Control Box: Yes.
  • Push Button Power Supply: Battery (supplied).
  • Control Box Power Supply: 3-pin Plug in Transformer.