Long Range (800 metre) Wireless Disabled Toilet Alarm (Protect 800)

Long Range Wireless (800 metre) Disabled Toilet Alarm, comprising of a Wireless Pull Cord Switch & Wireless Latching Siren & Flashing Strobe LED Assembly from the Protect 800 family.

How it Works:

If the Pull Cord Switch is activated, a long range Wireless Signal will be transmitted to the Siren Assembly, this will activate the built in Siren & Flashing LED, which will remain Latched ON until the reset button is pressed (which is located on the bottom of the box). 

You can add up to 15 additional Wireless Pull Switches (or other transmitters) to this system together with unlimited Siren assemblies.

This is ideal for when the traditional shorter range kits do not have the Wireless range to be able to fit the Siren into the desired locations.  

Wireless Range:

The Wireless operating range between the Pull Cord Switch & Siren Assembly is an impressive 800 metres (line of sight) which equates to around 400 - 500 metres in most applications.

Siren Assembly:

The Wireless Siren assembly is powered by a 3 or 2-pin plug in transformer and has:

• A built in Siren with volume control (up to 106 Decibels) and a choice of 32 different tones allowing you to select the one most suitable for your environment.
• A Blue Flashing LED (when activated).

The assembly is fully weatherproof should you wish to install it outside.

Pull Switch Assembly:

The Wireless Pull Switch is powered by a built in CR123A Battery (making it very easy to locate) which will operate for between 12 - 18 months in most applications.

It is supplied to be ceiling mounted and comes with 2 metres of cord which can easily be shortened to suit the application.

The maximum number of Pull Cords or other Protect 800 Transmitters that can be used is 16.

Installation:

The Siren assembly is simply fitted to the wall using 4 x screws through the side mounted lugs and is then connected to the power supply using the transformer supplied into a suitable socket.

The Pull Switch is fitted Firmly onto the Ceiling using suitable fixings (not supplied as surfaces will vary). 

A Disabled Toilet Alarm with Long Range Wireless Operation for specific applications. 

If you need further advice, please ASK !!

• 1 x Protect 800 Pull Switch Assembly (009-4220).
• 1 x Protect 800 Siren Assembly with Latching Relay & Reset Button (009-4030).
• 1 x Plug in Power Supply (3 or 2-pin available).

Siren Assembly: 

• Wireless Operating Range: 800 metres (line of sight).
• Power Supply: 3-pin UK & 2-pin European Transformer Supplied.
• Battery Backup: Yes 4 x AAA Batteries (not supplied).
• Maximum Number of Detectors Can Be Used: 16.
• Multiple Receivers can be used: Yes (no limit).
• Mounting Method: Wall or Desk Mounted.
• Colour: White.
• Weatherproof: Yes (IP65).
• Flashing LED: Yes (when triggered).
• LED Colour: Blue.
• Siren Tones: 32 (selectable).
• Siren & Strobe Duration: Latched.
• Siren Reset Method: Push Button (located on the bottom of the box).
• Volume Control: Yes (106 Decibel to zero).
• Frequency: 869.400 – 869.650.
• Label: V Range.

Mounting Box:

• Material: Plastic.
• Weatherproof: IP65.
• External Size: 225 (W) x 185 (H) x 70 (D) mm.
• Internal Size: 185 (W) x 185 (H) x 65 (D) mm.

Pull Switch Assembly:

Transmitter:

• Wireless Range: 800 metre (line of sight).
• Power Supply: 1 x 3v Lithium CR123A Battery.
• Battery Life: 12 - 18 months (most applications).
• Size: 65 x 33 x 15 mm.
• Activation Method: Pull Switch.

Pull Switch:

• Size of Assembly Base: 88 (L) x 88 (W) x 100 (D). 
• Switch: Momentary.
• Cord Length: 2 metres (can be shortened).