Heyo-Alert with 4G Dialler

Heyo-Alert Wireless Alert with 4G UltraDIAL Dialler - Kit 5

004-7120-52

New

Heyo-Alert Wireless Alert Kit 5:

  • 4G UltraDIAL:
    • Contact Key-holders by Phone & Text.
  • Indoor Receiver:
    • 16 Alert Channels.
    • 16 Melody Options.
    • Volume Control.
    • 2 x Output Relays.
    • 1 x 12v DC Output.
  • Weatherproof Multi Use Transmitter.
    • Battery Powered.
    • Push Button.
    • Magnetic Contact.
    • Input Relays.
  • 700 metre Range (line of sight).
  • Operates with all Heyo-Alert Products.

More details

4G Dialler - Contact Key-holders by Phone & Text| Please note: out of stock

593,80 €

(including 23% vat)
100% secure payment

Heyo-Alert Wireless Alert Kit 5:

  • 4G UltraDIAL:
    • Contact Key-holders by Phone & Text.
  • Indoor Receiver:
    • 16 Alert Channels.
    • 16 Melody Options.
    • Volume Control.
    • 2 x Output Relays.
    • 1 x 12v DC Output.
  • Weatherproof Multi Use Transmitter.
    • Battery Powered.
    • Push Button (for panic or help required situations).
    • Magnetic Contact (for gates or doors).
    • Input Relays (multitude of wired accessories).
  • 700 metre Range (line of sight).
  • Operates with all Heyo-Alert Products.
  • Suitable for Domestic & Commercial applications.

Heyo Alert Kit 5

How it Works:

This Heyo-Alert Wireless Driveway Alarm is supplied with an additional 4G Auto-Dialler (UltraDIAL) which is connected to the Indoor Receiver by a short length of cable.

The Indoor Receiver is connected to the Multi Use Transmitter by a unique and secure wireless network and can communicate between each other up to 700 metres away (line of sight).

The Heyo-Alert Multi Use Battery Transmitter can be activated in various ways:

  • As a Wireless Magnetic Door or Gate Contact (supplied).
  • By Pressing the Clear & Large Push Button.
  • By connecting various Wired accessories to the N/O & N/C Input.

If the Multi Use Transmitter is triggered it will activate the Chimes & LED's on the Indoor Receiver together with any additional accessories that may be connected into it, examples would include:

  • Wired Bell.
  • Wired Siren.
  • Wired Strobes.

At the same time it will also trigger the 4G UltraDIAL which would contact up to three key-holders by Phone or Text (if armed). The UltraDIAL is Armed & Disarmed by Remote Control which allows you to only use the Auto-Dialler when you are away from the premises.

This gives the choice of having:

  • Chimes, Bells, Sirens Only (depending on the chosen accessories).
  • Chimes, Bells, Sirens & Telephone Contact to Key-holders.

The Indoor Receiver & 4G UltraDIAL are powered by 3-pin Plug in Transformers making them easy & quick to fit.

The system can be expanded by:

Heyo-Alert

Heyo-Alert Plug in Indoor Receiver:

  • 16 Alert Channels.
  • 4 Levels of Sound (can also be silenced).
  • 700 metre Range (line of sight).
  • LED Indicator.
  • 16 Melody Options.
  • 2 x Output Relays (N/O, N/C & COM).
  • 1 x 12v DC Output Option.
  • Adjustable Output Duration (1, 5, 15 seconds & 5 minutes). 
  • Operates with all Heyo-Alert Transmitters.
  • Ideal for many Domestic & Commercial applications.

 Heyo-Alert Wireless Receiver

How it Works:

The Heyo-Alert Plug in Indoor Receiver is powered by a Plug in Transformer and can work in conjunction with up to 16 Heyo-Alert Transmitters and has 4 levels of Chime options together with LED notification.

When a Transmitter is activated a Wireless signal will activate the Receivers chosen Alert modes:

  • Chime (which can be turned off).
  • LED (which can be turned off).

Power Supply:

The Receiver is powered by a Plug in Transformer (12v DC 500 m/A).

Alert Options:

The Alert options on this Heyo-Alert Receiver are 16 different melody chime options (it can be used in silent mode) & a LED notification (which can be turned off).

Wireless Range:

The Wireless operating range between this Receiver & Heyo-Alert PIR's & Multi Function Transmitter is 700 metres (line of sight), which equates to around 400 - 600 metres in most applications.

12v Output:

There is a 12v DC Output on the Receiver which typically would be used to connect Sirens & Bells to it.

The duration is adjustable:

  • 1, 5, 15 seconds.
  • 5 minutes.

Output Relays:

The Receiver has two Output Relays (N/O, N/C & COM) which can be used to connect it to various control panels.

The duration of the Relays is adjustable:

  • 1, 5, 15 seconds.
  • 5 minutes.

Heyo-Alert Receiver Relays

'The 4G UltraDIAL' would be connected to the Heyo-Alert Indoor Receiver by a short length of cable, this cable could be extended to mount the UltraDIAL in a better location for the 4G Network signal, it could even be fitted outside as it is fully weatherproof should the 4G signal be a problem.

It is powered by a Mains Plug in Transformer but batteries can be fitted (3 x AA) should you want a battery backup (however they would not be re-charged by the device).

It will contact up to 3 x key-holders via Telephone & SMS.  

4G UltraDIAL Dialler

Supplied with 1 x Remote Control (additional ones can be added).

4G UltraDIAL Dialler Remote Control

Contacting Key-holders:

The Alarm will contact between 1 & 3 key-holders (depending on how you have chosen to program the alarm) by Telephone & SMS (either can be turned off whilst programming the alarm) when activated.

It will normally take take between 30 - 60 seconds to call the first key-holder when powered by battery, and quicker when powered by the Transformer supplied (this can vary depending on the mobile phone networks at the time).  

Communication:

The Alarm communicates via the mobile phone networks (nano sim card required).

It will contact up to three key-holders by Telephone (with your own pre-recorded message) & Text Message when activated.

SIM Card is Required (we recommend from the Country the device is to be used in).

You can also purchase the product with no sim card and simply use your preferred supplier (many options are available).

4G UltraDIAL Internal View

Recording Message:

You can record a 30 second message into the Alarm, which will be replayed to the key-holders when the Alarm calls them.

Arming & Disarming:

The Alarm is Armed & Disarmed by using the Remote Control from up to 100 metres away, up to 9 Remote Controls can be used with each Alarm. 
It is also possible to Arm & Disarm the Alarm via SMS (text message) when using the Transformer supplied.

There is a 30 second Exit Delay built into the Alarm for easy use.

Receiving a Call:

When the Alarm calls the key-holders, there is the choice to:

  • Listen to your pre-recorded message and do nothing (the alarm will contact the other key-holders).
  • Listen to your pre-recorded message and press # on your telephone (this will disarm the UltraDial and prevent it from calling further key-holders).
  • Listen to your pre-recorded message and press * on your telephone (this will prevent it from calling further key-holders, but keep the Alarm fully armed (ready for further activations).

Wireless Alarm Detectors:

The UltraDIAL can also be used with its own Wireless Alarm Detectors that can help protect the building the Indoor Receiver & UltraDIAL are being used, these can be up to 100 metres away from the UltraDIAL.

The options include:

  • Battery PIR's with Built in Sirens (007-0200).
  • Battery PIR's with a Hood & Siren (007-1410).
  • Battery UltraPIR's with a Hood used without the SIM Card in Silent Mode (007-0360).
  • Battery Wireless Door Contact (007-0260) or (007-1460).

Wireless Sirens:

The UltraDIAL can also have two Wireless Sirens connected to it, these are:

  • Indoor Battery Siren (007-0230).
  • Outdoor Solar or Battery Siren & Strobe (007-0221).

Easy Programming:

It is very easy to program, probably the easiest GSM Alarm to program on the market today by using the small built in keypad, following some very simple instructions.

Keypad 4G UltraDIAL Dialler

Weatherproof:

The UltraDIAL is fully weatherproof and rated at IP66, so can be used in most locations, it is not however designed to be submerged.

Weatherproof 4G UltraDIAL Dialler

Low Battery:

The Alarm will send the primary key-holder a SMS (text message) if the batteries are getting low.

Mains Power Failure:

When the Alarm is being used with the Transformer supplied, it will send the primary key-holder a SMS (text message) in the event of a Power Cut together with another when the power comes back on (provided you also have batteries fitted). 

Heyo-Alert Wireless Multi Use Transmitter:

  • 700 metre Range (line of sight).
  • Push Button (for security and help required applications).
  • Magnetic Contact (can be used on Gates & Doors)
  • Wired Inputs (optional N/O & N/C for connection to many types of accessories).
  • Weatherproof (IP64).
  • Battery Powered (CR2).
  • Long life Battery (typical 12 months operation).
  • Operates with all Heyo-Alert Receivers.
  • Ideal for many Domestic & Commercial applications.

 Heyo-Alert Multi Use Transmitter

How it Works:

The Heyo-Alert Multi Use Transmitter can also be used in different ways, examples are shown below:

  • As a Wireless Magnetic Door or Gate Contact (supplied).
  • By Pressing the Clear & Large Push Button.
  • By connecting various Wired accessories to the N/O & N/C Input.

When activated by the chosen method, it will transmit a Wireless signal up to 700 metres (line of sight) back to any Heyo-Alert Receiver that it has been paired with.

Multiple Receivers can be used with this Transmitter (no limit).

Heyo-Alert Multi Use Transmitter

Power:

The Transmitter is powered by a standard CR2 battery which will typically operate for 12 months in most applications. 

It will send a low battery signal back to the Indoor Receiver allowing for timely battery replacement.

Wireless Range:

The Wireless operating range between this Heyo-Alert Multi Use Transmitter and both Receivers is 700 metres (line of sight), which equates to around 400 - 600 metres in most applications.

Weatherproof:

The Transmitter is fully weatherproof (IP64) and therefore can be used Outdoors & Indoors.

Light Indicator:

There is a small LED indicator which confirms operation.

Input Relays:

The Input Relays can be used with many types of Wired accessories providing they operate on a Volt Free N/O or N/C Output, the options include:

  • Gate & Door Contacts.
  • Push Buttons.
  • Vibration Sensors.
  • Water Sensors.
  • Tilt Switches.

Typical Uses:

This Heyo-Alert Wireless Alert System is ideal for many applications, especially where customers need to keep mobile, examples would be:

  • Farms.
  • Kennels & Stables.
  • Gardens.
  • Retail Operations.
  • Workshops & Warehouses.
  • Caravans & Motorhomes (when on vacation).
  • Boats (when onboard).
  • The list is Endless.

If you have any questions or you have a specific application that you need to discuss, please Contact Us !!

If you need assistance in selecting the right product for your personal needs or support after making a purchase, please do not hesitate to contact us:
Contact us
Our opening times: Monday-Friday 8:00am-5:00pm
  • 1 x Multi Use Transmitter & Battery.
  • 1 x Plug in Receiver & Power Supply. 
  • 1 x 4G UltraDIAL, Batteries, Plug in Transformer & Remote Control.

Receiver:

  • Wireless range: Up to 700 meters (open field).
  • Volume Control: Yes (4 levels).
  • Channels: 16.
  • Melody Options: 16.
  • LED Indicator: Yes (can be turned off).
  • Low Battery Indicator: Yes (indicates of a Transmitter has a low battery).
  • Operating frequency: 433.92 MHz.
  • Relay output 1: NO/COM/NC.
  • Relay output 2: NO/COM/NC.
  • Powered output: 12V DC 400mA max.
  • Power supply: 12V DC 500mA.
  • Dimensions: 83mm (H) x 127mm (W) x 32m (D).
  • Duration of 12v & Relays: 1, 5, 15 seconds & 5 minutes.

Multi Use Transmitter:

  • Wireless transmission range: Up to 700 meters (line of sight).
  • Operating frequency: 433.92 MHz.
  • Wired connection: NO/COM/NC input.
  • Power supply: CR2 battery (3 V).
  • Dimensions: 95.3mm (H) x 50.8mm (W) x 22.2m (D).
  • Weatherproof: Yes (IP64).
  • Activation Methods:
    • Magnet.
    • Push Button.
    • N/O or N/C Wired Input.

4G UltraDIAL:

  • Power Supply: 3-pin Plug in Transformer (2-pin available upon request).
  • Battery Power: 3 x Lithium AA Batteries (supplied).
  • Battery Life: 6 months in most applications).
  • Main Power Input: 5v DC.
  • Programming Method: Easy Built in Keypad.
  • Wireless Transmission Range: 100 metres.
  • Size: 160 (L) x 82 (W) x 42 (D) mm.
  • Colour: Black.
  • Wired Inputs: Yes (1 x Volt Free N/O or N/C).
  • Cable Entry: 2 x Glands.
  • Wireless Inputs: Yes (Wireless PIR's & Door Contacts).
  • Wireless Outputs: Yes (Internal & External Sirens, PIR's).
  • Operates on 4G, 3G & 2G Networks.
  • SIM Card Required: Yes (standard size).
  • Calls Key-holders: Yes (maximum of three, which can be turned off).
  • Sends Key-holders SMS: Yes (maximum of three, which can be turned off).
  • Built in Siren: No (designed as a covert alarm).
  • Mounting Method: 2 x Screw Holes in Flange.
  • Weatherproof: Yes (IP66).
  • Arming & Disarming Method: Remote Control, Keypad, Receiving A Call.
  • Remote Operation on Battery: Yes (# to Disarm, * to Stop & Remain Armed).
  • Remote Operation on Mains:  Yes (# to Disarm, * to Stop & Remain Armed, SMS to Arm, SMS to Disarm).
  • Power Failure Notification: Yes (when used with the plug in transformer).
  • Weekly Status Report: Yes (can be turned off).
  • Low Battery Notification: Yes (to primary key-holder).
  • Recording Message: Yes (this will be replayed to the key-holders when the alarm calls them).
  • Frequencies:
    • LTE-TDD B38/B40/B41.
    • LTE FDD B1/B3/B5/B7/B8/B20/B28.
    • UMTS/HSPA+ B1/B8.
    • GSM/GPRS/EDGE 900/1800 MHz.