DA600+ Battery Driveway Alarm with Remote Controlled Receiver

DA600+ Wireless Driveway Alarm with:

• 1 x Battery Powered Outdoor PIR.
• 1 x Plug in Chime Receiver.
• 1 x Remote Controlled Switch.
• 1 x Remote Control.
• Control your Chime Receiver by Remote Control.
• Monitor Your:
  • Garde.
  • Driveway.
  • Outbuildings.
  • Sheds, Workshops & Garages.

How it Works:

This Wireless Driveway Alarm is supplied with a Battery Powered Weatherproof PIR, an Indoor Chime Receiver and a Remote Controlled Wall Switch.

The Indoor Chime Receiver is plugged into the Remote Controlled Wall Switch and can be turned ON & OFF at your discretion, by simply using the Remote Control from up to 50 metres away (additional remote controls can be added, see 005-6020).

The Wireless operating range between the PIR & Receiver is 400 metres (line of sight), which equates to around 150 - 300 metres in most applications (more than enough for most domestic applications) but can be more than doubled by adding a Signal Repeater if required.

Remote Switch:

• Supplied with 1 Remote Control (a further 3 could be added).
• Plugs directly into a UK 3-pin socket (no complex cabling).
• Plug any 3-pin Device into it.
• Operates ON & OFF (using remote control).
• Operate from up to 50 metres away. 
• No Internet required.
• Simple DIY Installation.
• Can be used in many applications (examples include):
  • Turning Lights ON & OFF.
  • Turning Alarm Panels ON & OFF.
  • Turning Radio ON & OFF.

PIR:

The Weatherproof Battery Powered PIR is ideal for locations where Solar Charging may be impractical or unwanted, they can be used both Outside & Inside (ideal to help protect outbuildings at the same time as monitoring your Driveway & Garden).

Powered by 3 x AA Batteries (supplied), which will operate in most domestic applications for 9 - 12 months and has a 15 metre detection range and an elongated lens designed to help avoid detecting small ground animals.

The ideal position for mounting the PIR is around 1.5 to 2.0 metre from the ground, aimed level (not towards the ground).

The PIR has 2 sensitivity settings to help suit different applications. 

Receiver:

The Wireless Receiver simply plugs into a 3-pin wall socket and will chime whenever a PIR detects movement.

It has volume control (4 levels) and 35 different chimes to choose from, allowing you to have a different tune for different PIR's.

The Receiver can be used with up to 32 PIR's, you can also add additional Receivers (no limit) if you want an alert in multiple rooms.

Expansion:

This Driveway Alarm can be used with a multitude of different Alarm Sensors & Receivers including:

• Additional Battery PIR's.
• Solar PIR's.
• Solar Perimeter Beams.
• Door Contacts.
• Gate Contacts.
• Push Buttons.
• Solar Sirens.
• Additional Receivers.
• T Receivers.
• Receiver with 4 Outputs.
• Signal Repeater.

Dummy PIR:

We can also offer an Identical looking Dummy PIR should you want to make your Security more obvious or you want the Real PIR to be less conspicuous.

This is a very simple Alarm or Alert ideal for many standard Gardens & Driveways, but can be expanded in so many different ways if required.

Please Contact Us should need Advice.

• 1 x DA600+ Wireless Driveway Alarm (004-3910).
• 1 x Plug in Remote Control Socket Switch (005-6485).

PIR:

• Wireless Transmission Range: 400 metres (line of sight).
• Detection Range: 15 metres.
• Colour: Black.
• Mounting Bracket: Yes.
• Size (not including mounting bracket): 90 (H) x 68 (W) x 65 (D) mm. 
• Power Supply: 3 x AA Batteries (supplied).
• Sensitivity Settings: 2.

Receiver:

• Power Supply: 3-pin Socket.
• Volume Control: Yes (4 levels).
• Chimes: 35.
• Wireless Range: 400 metres (line of sight).
• Can work with additional PIR's: Yes (maximum 32).
• Colour: White.
• Size: 85 (H) x 80 (W) x 33 (D) mm.

Wireless Smart Socket Switch:

Remote Control: