PIR for the KP Wireless GSM Alarms.

Battery Powered Wireless PIR's, designed to work in conjunction with our full range of KP GSM Wireless Alarm System.

It has a 12 metre detection range & 110 degree detection pattern, a wireless range back to the receivers of 100 metres (line of sight) and is powered by a single PP3 battery (which would last approximately one year).

General PIR Advice:

One of the most important issues in the operation of a PIR, is in choosing the correct location. A sensor mounted in a unsuitable location has the potential to cause false triggers and reduce performance.
The main guide lines in choosing the best location are as follows:

1. Mount the PIR into a corner of a room.
2. Avoid heat spots from bright lamps suddenly turning on or off.
3. Do not install immediately above a radiator.
4. Do not install in a glass roof conservatory.
5. If possible, choose a corner of the room which is visible from an outside window, the PIR also creates a visual deterrent.

• 1 x PIR.
• 1 x Mounting Bracket.
• 1 x PP3 Battery.
• 1 x Manual.

• Size: 100 (H) x 60 (W) x 35 (D) mm (without bracket).
• Depth: 35 mm (without bracket) 60 mm (with bracket).
• Detection Range: 12 metres.
• Detection Angle: 110 Degrees.
• Power Supply: 1 x PP3 Battery (supplied).
• Battery Life: Approximately 1 year (normal use).