Battery 4G UltraDIAL Van Alarm with Wired Vibration Sensor.

4G UltraDIAL battery powered Vibration Sensor Van Alarm:

• 1 x Covert 4G UltraDIAL.
• 1 x Wired Vibration Sensor.
• 1 x Remote Control (more can be added).
• Contacts up the 3 x key-holders by Phone & Text.
• Battery Powered.
• Can be Expanded (upon ordering or in the future).
• Permanent or Temporary Installation.
• Ideal Van and other Vehicle Alarm.

The UltraDIAL is Armed & Disarmed by the Remote Control supplied (additional ones can be added).

Designed for use in Van & Vehicle applications where there is a need (or desire) to  activate an Alarm before a Door access has been achieved.

How it Works:

The UltraDIAL 4G Auto-Dialler is powered by 3 x AA Lithium Batteries and is fully weatherproof (IP66) and can be used in and around many types of Vehicles.

The Wired Vibration Sensor supplied with 3 metres of twin cable (which can be extended upon request) is connected into the UltraDIAL, and would be fitted onto the desired & suitable location by various methods, options are numerous including:

• Two Screws or Nuts & Bolts.
• Magnet.
• Strong Double Sided Tape.

Fixing accessories are not supplied due to the fact that there are many ways to fit the Vibration Sensor. 

The Vibration Sensor is very Sensitive and is for Internal Use Only.

If the Vibration Sensor is triggered (whilst the UltraDIAL is Armed), the UltraDIAL will silently contact up to three key-holders by Telephone (with your pre-recorded message) & SMS (either can be turned off if required).

If you want some sound, you can add Internal or External Wireless Sirens located in and around the Vehicle.

Other Uses:

Additional Wireless Alarm Sensors can be added to help protect your Van, Truck or Motorhome, these include:

• Wireless Door Contacts (007-0260).
• Wireless Vibration Sensor (007-1460).
• Indoor Battery Siren (007-0230).
• Outdoor Solar or Battery Siren & Strobe (007-0221).
• Standard PIR (007-0200).
• Standard PIR with Hood (007-1410).

Contacting Key-holders:

The Alarm will contact between 1 & 3 key-holders (depending on how you have chosen to program the alarm) by Telephone & SMS (either can be turned off whilst programming the alarm) when activated.

It will normally take take between 30 - 60 seconds to call the first key-holder when powered by battery as the Alarm sits in sleep mode to preserve battery power (it could be slightly quicker when powered by a usb cable), it can also vary between mobile phone networks at any given time.  

Recording Message:

You can record a 30 second message into the Alarm, which will be replayed to the key-holders when the Alarm calls them.

Arming & Disarming:

The Alarm is Armed & Disarmed by using the Remote Control normally from outside the Vehicle, up to 9 Remote Controls can be used with each Alarm. 
If the Alarm is powered by the external 5v USB power source, then it is possible to Arm & Disarm the Alarm via SMS (text message).There is a 30 second Exit Delay built into the Alarm for easy use.

Receiving a Call:

When the Alarm calls the key-holders, there is the choice to:

• Listen to your pre-recorded message and do nothing (the alarm will contact the other key-holders).
• Listen to your pre-recorded message and press # on your telephone (this will disarm the UltraDial and prevent it from calling further key-holders).
• Listen to your pre-recorded message and press * on your telephone (this will prevent it from calling further key-holders, but keep the Alarm fully armed (ready for further activations).

Easy Programming:

It is very easy to program, probably the easiest 4G or GSM Alarm to program on the market today by using the small built in keypad, following some very simple instructions.

Weatherproof:

The UltraDIAL is fully weatherproof and rated at IP66, the Vibration Sensor is for Indoor Use only.

Low Battery:

The Alarm will send the primary key-holder a SMS (text message) if the batteries are getting low.

SIM Cards:

The Alarm communicates via the mobile phone networks (sim card required), and uses a nano SIM Card (PAYG or Contract). It will contact up to three key-holders by Telephone (with your own pre-recorded message) & Text Message when activated.

We do offer two Roaming SIM Cards from a third party supplier (at cost) designed for use in Alarms & Tracker Systems, these are low level contract sim cards (working on a direct debit) operating over all the major UK Networks ensuring your Alarm has the best signal available in all locations. 

These can be selected within the drop down options near the Add to Card Button.

The two options are our 20 Plan (click here) & 50 Plan (click here), please click the links to read all about them.

You can also purchase the product with no sim card and simply use your preferred supplier (many options are available).

This is a unique Van, Truck & Motorhome Alarm designed and supplied by Ultra Secure Direct.

If you need advice, please Contact Us !!

• 1 x 4G UltraDIAL GSM Alarm.
• 1 x Remote Control.
• 3 x Lithium AA Batteries.
• 1 x Manual.
• 1 x Tool.
• 1 x Wired Vibration Sensor.

UltraDIAL:

• Battery Power: 3 x Lithium AA Batteries (supplied).
• Battery Life: 6 months in most applications).
• Main Power: Yes (optional 5v DC plug in transformer).
• Programming Method: Easy Built in Keypad.
• Wireless Transmission Range: 100 metres.
• Size: 160 (L) x 82 (W) x 42 (D) mm.
• Colour: Black.
• Wired Inputs: Yes (1 x Volt Free N/O or N/C).
• Cable Entry: 2 x Glands.
• Wireless Inputs: Yes (Wireless PIR's & Door Contacts).
• Wireless Outputs: Yes (Internal & External Sirens, PIR's).
• Operates on 4G, 3G & 2G Networks.
• SIM Card Required: Yes (nano standard size).
• Calls Key-holders: Yes (maximum of three, which can be turned off).
• Sends Key-holders SMS: Yes (maximum of three, which can be turned off).
• Built in Siren: No (designed as a covert alarm).
• Mounting Method: 2 x Screw Holes in Flange.
• Weatherproof: Yes (IP66 - Refer to manual for correct installation).
• Arming & Disarming Method: Remote Control, Keypad, Receiving A Call.
• Remote Operation on Battery: Yes (# to Disarm, * to Stop & Remain Armed).
• Remote Operation on Mains:  Yes (# to Disarm, * to Stop & Remain Armed, SMS to Arm, SMS to Disarm).
• Power Failure Notification: Yes (when used with a plug in transformer).
• Weekly Status Report: Yes (can be turned off).
• Low Battery Notification: Yes (to primary key-holder).
• Recording Message: Yes (this will be replayed to the key-holders when the alarm calls them).
• Frequencies:
• LTE-TDD B38/B40/B41.
• LTE FDD B1/B3/B5/B7/B8/B20/B28.
• UMTS/HSPA+ B1/B8.
• GSM/GPRS/EDGE 900/1800 MHz.

Vibration Sensor:

• Sensor Type: Vibration.
• Size: 45 x 27 x 20 mm.
• Cable Length: 3 metres.
• Cable Type: 2-core.
• Output: N/A (going closed).
• Internal Use: Yes.
• External Use: No.

Remote Control:

• Operating Range: 100 metres (line of sight).
• Arm & Disarm Function: Yes (BT, UltraPIR & UltraDIAL Alarms).
• SOS Function: Yes (UltraDIAL).
• Size: 65 x 40 x 12 mm.
• Key Ring Slot: Yes.
• Battery:1 x CR2032H.
• Pairing Button Location: Inside Battery Cover.
• Colour: White & Black.