Long Range (900 metre) Wireless Disabled Toilet Alarm (DA600+)

Long Range Wireless (900 metre) Disabled Toilet Alarm

Featuring a wireless pull-cord switch and a wireless latching siren and flashing strobe LED assembly from the DA600+ range.

How it Works:

When the pull-cord switch is activated, it sends a long-range wireless signal to the siren assembly. This triggers the built-in siren and flashing LED, which stays latched on until the reset button (located at the bottom of the unit) is pressed.

Ideal for settings where traditional short-range kits lack the wireless range to install the siren in preferred locations.

Illuminated LED:

Once the pull cord is pulled, the red LED will illuminate to show activation. This clear and visual cue serves as a reassurance, confirming activation, and ensuring help is on the way.

Please note: this does NOT Flash

Wireless Range:

The wireless operating range between the pull-cord switch and siren assembly reaches an impressive 900 metres (line of sight), which translates to around 400 - 600 metres in most applications, this can be at least doubled by adding a signal repeater 004-2910.

Siren Assembly:

The wireless siren assembly is powered by a 3 or 2-pin plug-in transformer and includes:

• A built-in siren with volume control (up to 106 decibels) and a choice of 32 different tones to suit your environment.
• A blue flashing LED that activates when triggered.

Pull Switch Assembly:

The wireless pull cord is powered by a built-in CMN21 battery, providing 12 - 18 months of operation in most applications. Its design makes it easy to locate and maintain.

This pull cord is supplied for ceiling mounting and comes with 2 metres of cord, which can be shortened to fit specific requirements.

Up to 128 pull cords or other DA-600+ transmitters can be connected within this system (32 Per Zone).

Installation:

The siren assembly is easily mounted to the wall with four screws through side-mounted lugs and connected to a power supply using the included transformer, which fits into a standard socket.

The pull switch is securely fixed to the ceiling with four screws (not supplied, as surfaces may vary).

This system provides a disabled toilet alarm with long-range wireless operation, ideal for specific applications.

If you need further advice, please Contact us

• 1 x DA-600+ Pull Switch Assembly 
• 1 x DA-600+ Siren Assembly with Latching Relay & Reset Button.
• 1 x Plug in Power Supply (3 or 2-pin available).

Siren Assembly:

• Size: 225 x 190 x 67 mm (not including Strobe)
• Box Material: Plastic
• Box Mounting Method: Handy Mounting Lugs with Pre-drilled Holes
• Wireless Operating Range: 400 - 900 metres - line of sight (depending on the transmitter)
• Repeater Option: Yes (available as an optional option)
• Siren: Adjustable in Tone (32 options) & Volume Control
• Volume Level: 106 Decibel to Zero
• Siren Reset Method: Push Button (located on the bottom of the box)
• Flashing Strobe: Blue
• Duration of Siren & Flashing Strobe LED: Latches ON (until reset)
• Power Supply: Plug in 3-pin Transformer - 2-pin available upon request
• Backup Battery: No
• Weatherproof: Yes

Mounting Box:

• Material: Plastic
• Weatherproof: IP65
• External Size: 225 (W) x 185 (H) x 70 (D) mm
• Internal Size: 185 (W) x 185 (H) x 65 (D) mm

Pull Switch Assembly:

Transmitter:

• Wireless Range: 900 metres (line of sight)
• Power Supply: 1 x MN21 12v Battery
• Push Buttons: One
• Frequency: 433 Mhz
• Size: 90 x 40 x 15mm
• Colour: White, Grey & Red Button
• Optional Cable Connection: Yes

Pull Switch:

• Size of Assembly Base: 90 (W) x 153 (H) x 53 (D) mm
• Switch: Momentary
• Cord Length: 2 metres (can be shortened)