Warehouse Special Long Range (900 metre) Wireless 'S' Bell System 2 Uni Button

Long Range (900 metre) Warehouse Special Wireless 'S' Entry Bell System 2 supplied with a Heavy Duty Push Button (with a universal bell symbol etched onto it) and a Loud Bell Wireless Bell.

Popular in many applications including:

• Warehouses.
• Schools.
• Factories.
• Farms & Rural Businesses.
• Large Homes.
• External Home Offices.
• Workshops.

The transmission range between the Battery powered Wireless Transmitter and the plug in Wireless Bell is an impressive 900 metres (line of sight), which equates to around 400 - 600 metre in most applications, this can be at least doubled by adding the Signal Repeaters (004-2910).

How it Works:

The Heavy Duty Push Button (with a universal bell symbol etched onto it) is connected to a Long Range Battery Transmitter (fitted inside a easy to mount weatherproof box) by 3 metres of bell cable (which can be shortened or lengthen upon request).

The Push Button would be mounted onto the most appropriate location and the transmitter box would be located into the lost suitable location for wireless transmission (this could be simply on the back of a post or just inside a factory wall).

The Wireless Bell assembly is powered by a plug in Transformer and includes an 85 Decibel Bell, the assembly is fully weatherproof therefore can be fitted inside a Warehouse or in the Yard. 

Additional Wireless Bells can be added (no limit) to this Bell System !!

When the Push Button is pressed, the Receiver will activate the Bell, the standard duration options for the Bell activations are from 10 - 60 seconds or 5 minutes.

Installation Guide:

These Bell Systems are very Easy to Install, the basic process would be:

1. Mount the H/D Push Button.
2. Mount the Battery Transmitter & Box (4 x Screws).
3. You may need to Remove the Cable between the Push Button & Transmitter Box to guide it through a hole in a Wall or Post (the cable can be lengthened or shortened to suit the installation).
4. Mount the Bell Assembly (4-screws).
5. Connect the Plug in Transformer into a standard 3-pin wall socket.

Additional Accessories:

Many different accessories can be added to this Warehouse Bell System to suit most commercial applications, these include:

• Additional Push Buttons & Transmitters.
• Simple Handheld or Wall Mounted Internal Push Buttons.
• Additional Receivers.
• Additional Bells.
• Loud Wired Sirens.
• Wired Buzzers.
• Wired Adjustable Sirens.
• Flashing LED's.
• Signal Repeaters.

These Wireless Bell System could also be used for other uses including:

• Staff Call Systems.
• Staff Panic Alarms.
• Intruder Alerts.

Please Contact Us for Friendly, No Obligation Advice !!

Very Easy & Quick to Install !!

• 1 x H/D Push Button (with a Universal Bell Symbol).
• 1 x S Transmitter & Mounting Box.
• 1 x Plug in Wireless Bell Assembly.
• 1 x 3-pin Plug in Transformer (2-pin available upon request).
• 1 x 85 Decibel Bell.
• 1 x 3 metre Bell Cable. 

Wireless Bell Receiver:

• Power Supply: 3-pin Plug in Transformer (2-pin available upon request).
• Power Supply Input: 12v DC (1 amp).
• External: Yes.
• Size: 150 mm Diameter x 60 mm Deep.
• Mounting Bracket: 4 x Holes.
• Volume: Approx 85 Db.
• Bell Duration: 10 seconds (can be changed to 1 - 60 seconds or 10 minutes).

Wireless Transmitter:

• Wireless Range: 900 metres (line of sight).
• Power Supply: 1 x MN21 12v Battery.
• Push Buttons: One.
• Frequency: 433 Mhz.
• Size: 90 x 40 x 15mm.
• Colour: White, Grey & Red Button.
• Optional Cable Connection: Yes.

Transmitter Mounting Box:

• Material: Plastic.
• Weatherproof: IP65.
• External Size: 195 (L) x 90 (W) x 45 (D) mm.
• Internal Size: 133 (L) x 83 (W) x 35 (D) mm.

Bell Specification:

• Power Supply: 12v DC.
• External: Yes.
• Size: 150 mm Diameter x 60 mm Deep.
• Mounting Bracket: 4 x Holes.
• Volume: Approx 85 Decibel.

Push Button Specification:

• Size: 85mm (L) x 40mm (W) x 40mm (D)
• Contact Type: NO or NC.
• Sealed Wired Contacts.
• Words: Universal Bell Symbol.