Extra Long Range (1800 metre) Wireless 'S' Bell System 2 with Internal Push Button

Long Range Warehouse Wireless 'S' Bell System 2, supplied with an Internal Wireless Long Range Push Button, Loud Wireless Bell assembly & Signal Repeater.

The Wireless Push Button is supplied with a wall bracket and is ideal for fitting inside a Reception area, it can also be taken out of the wall bracket and used as a portable Call Button (if required).

The system includes a Plug in Signal Repeater which extends the signal from 900 metre to 1800 metre (line of sight), which can be extremely useful in Warehouses & Commercial buildings full of stock, walls & general obstructions.

Popular in many applications including:

• Warehouses.
• Schools.
• Factories.
• Farms & Rural Businesses.
• Large Homes.
• External Home Offices.
• Workshops.

The transmission range between the Battery powered Wireless Push Button and the plug in Signal Repeater is an impressive 900 metres (line of sight), the distance from the Signal Repeater and Wireless Bell is also 900 metre (line of sight), this can still be increased by adding further Signal Repeaters (004-2910).

How it Works:

The Push Button would normally be slipped into the wall bracket supplied, and is ideal for fitting inside an unmanned Reception area and is very easy and quick to fit.

The Signal Repeater would be located approximately halfway between the Push Button and Wireless Bell (although this can be flexible depending on the nature of the building.

The Wireless Bell assembly is powered by a plug in Transformer and includes an 85 Decibel Bell, the assembly is fully weatherproof therefore can be fitted inside a Warehouse or in the Yard. 

Additional Wireless Bells can be added (no limit) to this Bell System !!

When the Push Button is pressed, a signal will be transmitted to the Signal Repeater which will then relay the signal onto the Wireless Bell assembly which will activate the Bell, the standard duration options for the Bell activations are from 10 - 60 seconds or 5 minutes.

When the system is not required, you simple remove the Push Button from the wall bracket.

Installation Guide:

These Bell Systems are very Easy to Install, the basic process would be:

1. Mount the Push Button wall bracket.
2. Mount the Signal Repeater & connect the 3-pin Transformer into a suitable wall socket.
3. Mount the Bell Assembly (4-screws) & connect the Plug in Transformer into a standard 3-pin wall socket.

Additional Accessories:

Many different accessories can be added to this Warehouse Bell System to suit most commercial applications, these include:

• Additional Push Buttons & Transmitters.
• Simple Handheld or Wall Mounted Internal Push Buttons.
• Additional Receivers.
• Additional Bells.
• Loud Wired Sirens.
• Wired Buzzers.
• Wired Adjustable Sirens.
• Flashing LED's.
• Signal Repeaters.

These Wireless Bell System could also be used for other uses including:

• Staff Call Systems.
• Staff Panic Alarms.
• Intruder Alerts.

Please Contact Us for Friendly, No Obligation Advice !!

Very Easy & Quick to Install !!

• 1 x Long Range Internal Battery Push Button.
• 1 x Plug in Bell Receiver Assembly.
• 2 x 3-pin Plug in Transformers (2-pin available upon request).
• 1 x 85 Decibel Bell.
• 1 x Signal Repeater.

Wireless Bell Receiver:

• Power Supply: 3-pin Plug in Transformer (2-pin available upon request).
• Power Supply Input: 12v DC (1 amp).
• External: Yes.
• Size: 150 mm Diameter x 60 mm Deep.
• Mounting Bracket: 4 x Holes.
• Volume: Approx 85 Db.
• Bell Duration: 10 seconds (can be changed to 1 - 60 seconds or 10 minutes).

Wireless Push Button:

• Wireless Range: 900 metres (line of sight).
• Power Supply: 1 x MN21 12v Battery.
• Push Buttons: One.
• Frequency: 433 Mhz.
• Size: 90 x 40 x 15mm.
• Colour: White, Grey & Red Button.
• Optional Cable Connection: Yes.
• External Use: No.

Bell Specification:

• Power Supply: 12v DC.
• External: Yes.
• Size: 150 mm Diameter x 60 mm Deep.
• Mounting Bracket: 4 x Holes.
• Volume: Approx 85 Decibel.

Signal Repeater:

• Wireless Range: 900 metres (line of sight).
• Power Supply: Plug in 3-pin Transformer (2-pin available).
• Frequency: 433 Mhz.
• Size: 160 (w) x 160 (h) including Aerial x 55 (d) mm.