Wireless Relay KPW2 Kit with Remote Control

Wireless Relay Kit with 2 x Relay Outputs which can be used as a Wireless Switch and can be used in three ways:

• Toggle (switch between N/O & N/C on demand).
• Latch (can be latched on and off on demand).
• Momentary (can supply a momentary switch).

Supplied with a Standard Remote Control, reference 005-0630 (more can be added) and Plug in Transformer.

Relay Outputs:

There are two Relay Outputs which can both be used as a N/O & N/C Output Switch which would be activated using the Remote Control supplied from up to 50 metres away, additional and different models can be added as follows:

• Standard Remote Control, reference 005-0630 (from up to 50 metres away).
• Panic Button, reference 005-0700 (from up to 100 metres away).
• Long Range, reference 005-1460 (from up to 1000 metres away).
• Wristwatch, reference 005-1480 (from up to 50 metres away).
• Necklace, reference 005-0680 (from up to 50 metres away).

Latching Mode:

The latching mode can be triggered using any Remote Control, but only turned OFF by using the Remote Control 005-0630.

Plastic Box:

The Relay is supplied in a small handy plastic box with cable entry.

Wireless Range:

The wireless range is stated in open air, this will be reduced by obstructions.

• 1 x Wireless Relay KPW2.
• 1 x Plastic Box.
• 1 x Remote Control.
• 1 x 3-pin Transformer (2-pin available upon request).

Relay:

• Size: 75 x 55 x 30 mm.
• Input Power Required: 12v DC.
• Number of Output Relays: 2.
• Output Relay Types: N/O & N/C.
• Output Relay Rating: 7 amp (240v AC).
• Latching Option: Yes.
• Momentary Option: Yes.
• Toggle Option: Yes.
• Number of Remote Controls can be used: 20.

Remote Control:

• Size: 55 (L) x 30 (W) x 10 (D) mm.
• Battery Life: 1 - 3 years (normal use).
• Battery Type: 12v MN27.
• Transmission Distance: 50 metres (line of sight).

Transformer:

• 3-pin: Standard Plug in Type (2-pin available upon request).
• Output: 12v DC.