4G UltraPIR Alarm with Rubber Hood

4G UltraPIR Battery Alarm with Hood (by Ultra Secure):

• 4G Alarm (contacts owners by Phone & SMS if Triggered).
• Built in PIR Sensor.
• Black Rubber Hood (allows you to narrow of the detection beam and can make it less obvious in dark conditions).
• 100% Wireless.
• AA Battery Powered (long lasting).
• 130 Decibel Siren (can be silenced).
• Long Range Remote Control.
• Stand-alone (stand-alone but can be expanded).
• Easy to Install.
• Ideal for use in all types of buildings.

The Rubber Hood supplied has the following benefits:

• To narrow the detection beam angle (ideal for helping to keep the detection beam away from certain parts of the building such as a Window).
• To help the PIR blend into a dark background.
• It hides any visual indication of the PIR working whilst dialling out.
• Gives further weather protection to the PIR, never a bad thing for electronics working in the damp.

The Rubber Hood simply slides over the PIR from the top, the front aperture can be made bigger in any direction should you need more protection in a certain direction.

4G UltraPIR:

The UltraPIR has a built in PIR detector and would normally be fitted into the corner of a room, not above a heat source such as a Heater.

It has a built in 130 Decibel Siren (which can be set to silent if preferred) and has a 30 second exit delay and a 5 second entry delay (normally disarmed from outside the building). The PIR has a 10 metre distance, 120 degrees horizontal & 90 degrees vertical detection pattern.

It is powered by 3 x standard AA Batteries (supplied) and typical battery life would be 12 - 18 months in most applications (depending on how often the Alarm is triggered).

You can choose to fit Lithium AA Batteries which will outlast a Duracell Alkaline Batteries by about 4 - 6 times together with performing far better in temperatures below freezing.

It is very easy and quick to fit and can be used as a permanent or temporary security solution.

Arming & Disarming: 

This 4G Alarm is Armed & Disarmed by using the Remote Control (supplied) from outside the Vehicle, additional Remote Controls can be added.

Additional Sensors:

This 4G UltraPIR Alarm can be expanded (if required) by adding any of the products found in the 'Accessory Tab' within this listing (no limit to how many can be added), these would be connected by a unique & secure Wireless network.

PROGRAMMING

The UltraPIR 4G boasts a user-friendly setup, thanks to its ergonomic rear-mounted keypad, which is thoughtfully shielded by a screw-secured cover. The keypad allows for the input of up to three contact numbers to be alerted in case the device is triggered, and for customizing settings like siren deactivation. To further aid in its usability, the device comes with an in-depth English language manual, simplifying the operational process. This extensive guide ensures a seamless user experience, facilitating a swift and effective setup of the UltraPIR 4G.

Communication:

The 4G Alarm communicates with key-holders via mobile phone networks using a standard sized SIM card (not provided) and will contact up to three by Telephone (with your own pre-recorded message) and/or Text Message when activated (phone calls or text can be turned off). When selecting an operator, choose one that offers the best network coverage in the area where the device will be installed. There's no need for an expensive plan or tariff (no data is required).

You can purchase the product with no sim card and simply use your preferred supplier (no data is required).

POWERFUL INTEGRATED SIREN

When the detector is triggered, it's built-in siren will sound for 60 seconds and reach 130 decibels. Once it stops, the system remains armed. If new movement is detected, the alarm will sound again. If necessary, this can be silenced for customers wanting a silent alarm (a simple process on the keypad). If silenced the Alarm will still activate any other PIR's or Sirens which have been paired into the same wireless network, this gives you the benefit of activating as many Sirens as you wish without drawing attention to the location of the UltraPIR.

EXCEPTIONAL BATTERY PERFORMANCE

The UltraPIR 4G distinguishes itself in the market with its self-sufficient operational capability. This infrared motion detector is powered by 3 AA batteries (provided), boasting a remarkable battery life of up to 12 - 18 months with continuous usage. This ensures dependable performance, offering users consistent, long-term surveillance without the need for frequent battery changes.

It is also possible to use Lithium AA Batteries for customers wanting more battery life or better performance in very cold conditions (below freezing).

DETECTION:

The Alarm system has a 30 second exit delay and a 5 second entry delay (normally disarmed from outside the building). The UltraPIR 4G is designed to detect heat movements emitted by a person. Detection is based on a specialized lens, which enables it to cover a range of up to 10 meters at a 120° horizontal angle.

LOW BATTERY"

The UltraPIR 4G addresses the critical concern of power source reliability in its self-sufficient design. It incorporates an effective low battery alert system. When the batteries are low, a light indicator on the device remains illuminated as a visual cue. Furthermore, for added vigilance, the UltraPIR 4G sends out an SMS alert to all registered contacts, informing them of the low battery status. This dual-notification system ensures that the device operates continuously and securely, reducing the likelihood of unexpected operational pauses.

• 1 x 4G UltraPIR GSM Alarm.
• 1 x Rubber Hood.
• 1 x Mounting Bracket.
• 1 x Remote Control.
• 3 x AA Alkaline Batteries.
• 1 x Manual.

UltraPIR:

• Power Supply: 3 x AA Batteries (supplied).
• 4G, 3G & 2G Compatible: Yes.
• Battery Life: 
• 7 months (being armed & disarmed once per day).
• 2- 3 months (being armed & disarmed once per day & one activation per day, variations caused by how many telephone & sms calls are made during activation).
• Low Battery Warning: Yes (SMS at 3.8 - 4.0 volts stating Low Battery & Red Light on PIR).
• Size: 110 (H) x 70 (W) x 40 (D) mm (depth including mounting bracket 65 mm).
• Detection Range: 10 metres.
• Detection Angle: 120 Degrees Horizontal - 90 Degrees Vertical.
• Arming Method: Remote Control.
• Maximum Number of Remote Controls: 9.
• Remote Control Operation Distance: 100 metres.
• Remote Operation: Yes.
• Built in Siren: 130 Decibel.
• Duration of Siren: 60 seconds.
• Ability of Operating PIR Silently: Yes.
• Ability to add additional Sirens: Yes (battery powered internal & external sirens).
• Frequency to Wireless Sirens 868 Mhz.
• Network Frequencies:
• LTE-TDD B38/B40/B41.
• LTE FDD B1/B3/B5/B7/B8/B20/B28.
• UMTS/HSPA+ B1/B8.
• GSM/GPRS/EDGE 900/1800 MHz.
• Operates on 4G, 3G & 2G Networks
• Operating Temperature: 0 Degrees to +40 Degrees.
• Turning Text ON & OFF #9#.
• Turning Telephone ON & OFF *9*.

Rubber Hood:

• Colour: Black.
• Material: Rubber.
• Installation Method: Slide over PIR from the Top.
• Front Aperture Size: 18 mm Diameter.