4G Battery Covert UltraDIAL Alarm with 4 x Outdoor BT PIR's
4G UltraDIAL battery powered IP66 Standalone GSM Alarm supplied with 4 x Wireless Outdoor PIR's with built in Sirens, it contacts up to 3 x key-holders via Telephone & SMS. Supplied with 5 x Remote Controls, ideal for many applications including Scaffolding.
Recipient :
* Required fields
or Cancel
007-2160
New
4G UltraDIAL battery powered IP66 Standalone GSM Alarm supplied with 4 x Wireless Outdoor PIR's with built in Sirens, it contacts up to 3 x key-holders via Telephone & SMS. Supplied with 5 x Remote Controls, ideal for many applications including Scaffolding.
Operates on 4G, 3G & 2G Networks | Please note: out of stock
This product is no longer in stock
Availability date:
The UltraDIAL battery powered Covert IP66 Standalone 4G GSM Alarm supplied with 4 x Wireless Outdoor PIR's with built in Sirens, it contacts up to 3 x key-holders via Telephone & SMS. Supplied with 5 x Remote Controls, ideal for many applications including Scaffolding.
How it Works:
This kit comprises of a battery powered 4G GSM UltraDIAL Covert Alarm Dialler & 4 x battery powered Outdoor Wireless PIR's which have built in 130 decibel Sirens.
The UltraDIAL & PIR's are connected to each other within a unique & secure Wireless Network (operating up to 100 metres apart) and all are Armed & Disarmed at the same time using any of the Remote Controls.
If any of the PIR's detects an Intruder, it will silently trigger the 4G UltraDIAL Alarm before activating the built in Sirens on all PIR's, at the same time the UltraDIAL will be secretly contacting key-holders by Telephone & SMS.
If additional PIR's or Sirens are added to the system (no limit), they would all sound at the same time.
The secret of using this Alarm is to hide (or lock) away the UltraDIAL in a location where an Intruder wouldn't even know it is there (if this is not possible then ideally locate the UltraDIAL well out of reach), this is very easy due to the fact it is Battery powered, Wireless & fully Weatherproof.
This simple Alarm is ideal for so many applications, examples are:
Communication:
The Alarm communicates via the mobile phone networks (nano sim card required).
It will contact up to three key-holders by Telephone (with your own pre-recorded message) & Text Message when activated.
We recommend using a SIM Card with a Network from the Country that the device will be used.
Additional Wireless PIR's & Sirens:
The Alarm can be paired to various devices (no limit) which have built in Sirens, these will make the sound whilst the Covert UltraDIAL silently calls the key-holders without an Intruder knowing, these can be located up to 100 metres (line of sight) away:
These Sirens & devices include:
If you prefer the Alarm to be Silent, then you can use the UltraPIR Detectors (007-1400) set to silent without needing to use the SIM Card facility.
BT PIR:
The battery powered PIR's (007-1410) have a Built in 130 Decibel Siren and is supplied with a Rubber Hood, the benefits of the hood are:
The Rubber Hood simply slides over the PIR from the top, the front aperture can be made bigger in any direction should you need more protection in a certain direction.
The PIR's have a 30 second Exit Delay & 5 second Entry Delay. The detection range is 8 metres with a horizontal coverage of 120 degrees and vertical of 90 degrees if the hood fully opened up.
Arming & Disarming:
The Alarms are Armed & Disarmed by using the 5 x Remote Controls (supplied) from up to 100 metres away, up to 9 Remote Controls can be used with each Alarm.
If the UltraDIAL Alarm is powered by the external 5v power source, then it is possible to Arm & Disarm the Alarm via SMS (text message).There is a 30 second Exit Delay built into the Alarm for easy use.
Contacting Key-holders:
The Alarm will contact between 1 & 3 key-holders (depending on how you have chosen to program the alarm) by Telephone & SMS (either can be turned off whilst programming the alarm) when activated.
It will normally take take between 30 - 60 seconds to call the first key-holder when powered by battery, and quicker when powered by a plug in transformer or usb cable (this can vary depending on the mobile phone networks at the time).
Recording Message:
You can record a 30 second message into the Alarm, which will be replayed to the key-holders when the Alarm calls them.
Power Supply:
The UltraDIAL Alarm is powered by 3 x Lithium AA Batteries (supplied) which will last around 6 months in most applications, it can also be powered by a 5v Plug in Transformer or USB Cable where a power supply is available. If the power supply is used, the batteries can be kept in the Alarm as a backup although they will not be charged by the device.
The BT PIR (007-0200) is powered by 3 x AA Duracell Batteries.
Receiving a Call:
When the Alarm calls the key-holders, there is the choice to:
Wired Alarm Detectors:
The UltraDIAL has one momentary volt free Input, 1 x N/O or N/C Input, these can be used with many types of devices, examples listed below:
Normally Open going Closed:
Normally Closed going Open:
Easy Programming:
The UltraDIAL is very easy to program, probably the easiest GSM Alarm to program on the market today by using the small built in keypad, following some very simple instructions.
Weatherproof:
The UltraDIAL is fully weatherproof and rated at IP66, so can be used in most locations, it is not however designed to be submerged.
Low Battery:
The UltraDIAL Alarm will send the primary key-holder a SMS (text message) if the batteries are getting low.
Mains Power Failure:
When the Alarm is being powered by an external 5v power supply, it will send the primary key-holder a SMS (text message) in the event of a Power Cut together with another when the power comes back on (provided you also have batteries fitted).
Status Report:
A status report can be obtained by sending the device a Text Message.
Security Screws:
The lid is fitted with 4 x security screws and a tool is supplied as standard.
This is a very versatile Security device ideal for many applications designed by Ultra Secure Direct.
If you need advice, please Contact Us !!
Heavy Duty Security Magnetic Gate Contacts, for use with many types of Alarm Systems.
Unique Battery Powered PIR Alarm with Built in 130 Decibel Siren, operated by Remote Control (up to 50 metres away) and can be used on its own or with various additional Sirens.
Battery Powered Internal Wireless 130 Decibel Siren, for use with the BT & UltraPIR Wireless Shed & Garage Alarm Systems.
Unique Solar Powered Wireless Siren & Strobe, with built in 130 Decibel Siren, Tamper Switch & 50 metres Wireless Range, for use with the BT PIR & UltraPIR Alarms.
Wireless Door & Window Alarm Contact for use with the full ranges of BT & UltraPIR Wireless Alarms.
4G UltraPIR Battery Van Alarm with Hood (by Ultra Secure): 4G Alarm (contacts owners by Phone & SMS if Triggered). Built in PIR Sensor. Black Rubber Hood. 100% Wireless. AA Battery Powered (long lasting). 130 Decibel Siren (can be silenced). Long Range Remote Control. Stand-alone (stand-alone but can be expanded). Easy to Install. Ideal for Helping...
Battery Powered PIR Alarm with Built in 130 Decibel Siren, operated by Remote Control (up to 50 metres away) and can be used on its own or with various additional Sirens. Supplied with a Rubber Hood which is designed to narrow the detection beam and make it less visible.
Wired Output Solar Powered DA600+ Wireless Perimeter Beams with Dual Detection Technology, 100 metre Detection, Wired Cable N/O & N/C Output & 900 metre Wireless Transmission. Can be connected to a Wired Auto-Dialler.
Wireless Magnetic Gate Contact Kit for use with the Covert UltraDIAL & UltraPIR 3G GSM Alarms, with a wireless transmission range of 100 metres (line of sight).
Wireless Pressure Mat for use with the BT Alarms & UltraDIAL & UltraPIR 3G GSM Alarm Systems.
3-pin Transformer for the UltraDIAL GSM Alarms.
Remote Control which can Arm & Disarm our BT, UltraPIR & UltraDIAL Alarms together with the added feature of having a built in SOS function when using the UltraDIAL.
A USB Cable for customers wishing to power a UltraDIAL with mains, but have no 3-pin sockets available.
Wired Vibration Sensor & 3 metres of Cable, can be used with the UltraDIAL 3G GSM Alarm or other Alarm Panels.
BT Wireless Vibration & Magnetic Door Window Contact with Keypad (can be used to Arm & Disarm) & optional Internal Siren for use with the UltraPIR, UltraDIAL & BT PIR Alarms.
A protective Steel Cage A designed to help protect various Security devices from Damage or Theft.
Additional Solar Powered Wireless DA600+ PIR for use with any of the DA600+ Driveway & Perimeter Alarms.
UltraDIAL:
BT PIR's: