Reduced price! XL Wireless Alarm System D

XL Wireless Alarm System D

Ultra Secure

005-0040

New

XL Wireless Alarm System D, which includes a compact 4-channel Receiver (with built in 100 decibel siren), 1 x Wireless PIR & 2 x Wireless Magnetic Door & Window Contact, this starter pack can be used on its own as a small Wireless Alarm System or as a base to build a bigger and more complex Intruder Alarm System. 

More details

161,18 €

(including 23% vat)

165,73 €

-4,55 €

Visa
Mastercard
Sagepay
Paypal
100% Secure Payment
97% Customer Satisfaction
Technical Help-line
30 Day Money Back Guarantee

A unique XL Wireless Alarm System D, which includes a compact 4-channel Receiver (with built in 100 decibel siren), 1 x Wireless PIR & 2 x Wireless Magnetic Door & Window Contacts. This starter pack can be used on its own as a small Wireless Alarm System (helping to protect a small building, workshops or holiday homes), or as a base to build a bigger and more complex Intruder Alarm System (using the large selection of available accessories).

Battery powered internal Wireless PIR's (passive infra-red detectors) will detect a person from up to 13 metres away and transmit a wireless signal back to the XL Wireless Alarm Control Panel up to 80 metres away. The PIR's are supplied with a simple adjustable wall bracket and are best installed into a corner of a room, ideally visible from an outside window (acts as a visual deterrent).

Wireless Magnetic Contact's are used to protect vulnerable Doors & Windows, the battery powered sensors would be attached the the Door/Window & Frame (using double sided tape supplied). When the Door or Window is opened, a signal will be transmitted back the XL Alarm Receiver.   

Up to 16 Wireless Alarm Detectors can be used with an XL Wireless Alarm Receiver, they can be used to create both a full alarm condition or simple audible alert (depending on the chosen mode of operation).

The compact 4-channel Receiver has a multitude of unique features (listed below) making it a very versatile Alarm System:

  • Built in 100 Decibel Siren (channels 1, 2 & 3). 
  • Siren Duration: 3 minutes or before if turned off by a key-holder (the receiver remains armed if the siren switches off due to the 3 minute duration).
  • Built in Audible Chime (channels 1, 2 & 3).
  • Built in Audible 'Beep' (channels 1, 2, 3 & 4).
  • Built in Keypad (for arming and disarming the alarm).
  • 3 x Alarm & Alert Channels (channels 1, 2 & 3).
  • 1 x Alert Only Channel (channel 4).
  • Each Channel can work with 4 x Wireless Detectors.
  • Plugs into a 13-amp Wall Socket.
  • Battery Back-Up.
  • Option to Turn a Any Channel OFF.
  • Built in Wireless Transmitter (for activating wireless sirens & auto-dialers).
  • Can also be Armed & Disarmed using Remote Control & Wireless Keypads (4 in total).
  • Low Battery Warning.
  • Visual LED Notification.
  • Home Arm Option: (instant activation of the siren).
  • Away Arm Option: (45 audible second count down upon activation).
 
Mounting the PIR Sensor:
The key to successful operation of any PIR sensor is choosing the correct location. A sensor mounted in a unsuitable location has the potential to cause false triggers and reduce performance. The main rules that should be followed are:
  1. Mount the PIR into a corner of a room, if possible visible from an outside window (this also creates a visual deterrent to a potential thief).
  2. Avoid heat spots from bright lamps suddenly turning on or off.
  3. Do not install immediately above a radiator.
  4. Do not install in a glass roof conservatory.
 
Mounting the Magnetic Contact:
  1.  Attach the battery powered magnetic contact to the top edge of the door or window (towards the hinge end) using the double side tape supplied.
  2. Using the double sided tape supplied, attach the magnet onto the door or window frame, so that when closed it is nearly touching the magnetic contact.
  3. Put the XL Wireless Receiver into chime mode, open the window to test the positioning of the Magnetic Contact & Magnet, if the receiver chimes each time the window is opened then the positioning is correct.
  4. Once you are happy with the positioning, finish the installation by fitting two screws (supplied) through the two holes in the magnet, into the door or window frame.
  5. Please Note: the positioning of the Magnetic Conacts can vary on some doors or windows.
 
A very versatile Wireless Alarm System that can be used in so many different ways !!
If you need assistance in selecting the right product for your personal needs or support after making a purchase, please do not hesitate to contact us:
Contact us
Our opening times: Monday-Friday 8:00am-5:00pm
  • 1 x XL Wireless Receiver.
  • 1 x 3-pin Power Supply (2-pin available upon request).
  • 1 x Wireless PIR.
  • 1 x PP3 Battery (for use inside the PIR).
  • 2 x Magnetic Contacts (including magnets, batteries & double sided tape).
  • 1 x Set of Manuals. 

Receiver:

  • Wireless Range: 80 metres (line of sight).
  • Channels Available: 4 (3 x Alarm/Alert & 1 x Alert).
  • Wireless Alarm Detectors Per Channel: 4.
  • Alarm & Alert Channels (1, 2 & 3).
  • Dedicated Alert Channel (4).
  • Alarm Options: 2 (Home & Away).
  • Built in Siren: Yes (100 Decibels, channels 1, 2 & 3).
  • Built in Chime: Yes (channels 1, 2 & 3).
  • Siren Duration: 3 minutes (or before if turned off by key-holder).
  • Power Supply: Plug in Transformer (2-pin or 3-pin).
  • Battery Back Up: Yes: 4 x AAA (not supplied).
  • Mute Button: Yes (on all channels).
  • Mounting Method: Wall or Desk.
  • Entry & Exit Delay Option: Yes (45 seconds).
  • Instant Entry Alarm Option: Yes (home arm only).
  • Built in Keypad: Yes (4-digit).
  • Low Battery Indicator: Yes (flashing red LED's on the receiver).
  • Built in Tranmitter: Yes (to activate optional sirens & auto-dialers).
  • Frequency: 433 Mhz.
  • Size: 125 (w) x 90 (H) x 30 (D) mm.


PIR: 

  • Dimensions: 90 (H) x 45 (W) x 65 (D) mm.
  • Weight: 60g.
  • Power Supply: 9v PP3 battery.
  • Working Frequency: 433Mhz.
  • Working Radio range: 80 metres (line of sight).
  • Detection range: 13 metres.
  • Working frequency is 433 MHz.
  • Mounting Method: Swivel adjustment.
  • Battery Life: 1 yr in most applications.

 

Magnetic Contact:

  • Contact Dimensions: 80 (L) x 35 (W) x 20 (D)mm.
  • Magnet Dimensions:  58 (H) x 13 (W) x 9 (D) mm.
  • Weight: 30g.
  • Power Supply: 3v Lithium battery.
  • Working Frequency: 433Mhz.
  • Working Radio range: 80 metres (line of sight).
  • Battery Life: 12 - 18 months in normal applications.
  • Fixing Methods: Double sided tape or screws. 

Listed below are just a few typical examples of how this XL Wireless Alarm System may be used, there are many other variations that can be chosen:

  • Receiver Located Inside House, Wireless PIR located outside on the Drive or Car Parking Area (set to alert channel 4), Wireless Magnetic Contacts fitted onto the Front & Back Door (set to alarm & chime zone 1), when the PIR detects someone outside the Receiver will beep, if either of the doors are opened the Receiver will either chime or go into full alarm mode (depending on what mode of operation the Receiver has been put into).
  • Receiver, PIR & Magnetic Contact's fitted into the house, if the Alarm is Home Armed, the Magnetic Contacts will be  'ON' protecting the doors or windows, but the PIR will be 'OFF' (allowing you to walk around the house. When the Alarm is Away Armed, both the Magnetic Contact & PIR will be 'ON'.
  • Receiver Located Inside the House, Wireless PIR & 1 x Magnetic Contact fitted into a external building (shed or garage), up to 60 metres away, and the other Magnetic Contact fitted onto a door of the house. The Receiver can be set to either Chime or Full Alarm modes for different times of the day, protecting both the shed or garage & house door.
  • This system used as a base kit, to build a far more comprehensive alarm system, adding additional Wireless PIR's, Magnetic Contacts, Vibration Sensors, Sirens, Tilt Switches, Remote Controls, Auto-Dialers etc.