Wireless Relay KPW2

Wireless Relay with 2 x Output Relays which can be used as a Wireless Switch and can be used in three ways:

• Toggle (switch between N/O & N/C on demand).
• Latch (can be latched on and off on demand).
• Momentary (can supply a momentary switch).

Relay Outputs:

There are two Output Relays both which can be used as a N/O & N/C Output Switch which will be activated in the desired way using the following Remote Controls:

• Standard Remote Control, reference 005-0630 (from up to 50 metres away).
• Panic Button, reference 005-0700 (from up to 100 metres away).
• Long Range, reference 005-1460 (from up to 1000 metres away).
• Wristwatch, reference 005-1480 (from up to 50 metres away).
• Necklace, reference 005-0680 (from up to 50 metres away).

Latching Mode:

The latching modes can be triggered using any Remote Control, but only turned OFF by using the Remote Control 005-0630.

Power Supply:

The Relay requires a power supply of 12v DC (not supplied), transformers can be supplied upon request.

Plastic Box:

The Relay is supplied in a small handy plastic box with cable entry.

Wireless Range:

The wireless range is stated in open air, this will be reduced by obstructions.

• 1 x KPW2 Relay.
• 1 x Plastic Box.

• Size: 75 x 55 x 30 mm.
• Input Power Required: 12v DC.
• Number of Output Relays: 2.
• Output Relay Types: N/O & N/C.
• Output Relay Rating: 7 amp (240v AC).
• Latching Option: Yes.
• Momentary Option: Yes.
• Toggle Option: Yes.
• Number of Remote Controls can be used: 20.