DC & Battery Safety Photocell Beams

12 - 24v AC/DC & Battery Safety Photocell Beams for use on Automatic Gates & Barriers, the battery powered Beam is ideal for installation on the far side of the road (where no easy way to run a power supply).

Ideal for a Easy & Clean Installation, No need to dig the road up to lay the cable from the control panel side of the gate !!

These unique Beams can be used with all types Automatic Gates & Barriers together with many types of Security Installations, they have the following features:

• One Beam is powered by 2 x AA Batteries (no need to dig the drive up to get cable across the road).
• One Beam is powered by 12- 24v AC/DC supply (normally taken directly from the gate control board.
• Rotating Internal Eye (making installation easy).
• 12 metre Operating Range.
• N/O or N/C Output Relay.

Very Popular with Gate Installers !!

• 2 x Beams.
• 2 x AA Batteries.
• 1 x Set of Screws.

• Working Voltage: 1 x 12~24VAC/DC and 1 x 3v Dry Battery (battery supplied).
• Working Current(24VDC):emitter: =8mA receiver: =40mA.
• Photocell Wavelength: 940nm.
• Angle of opposite emission: =±5º.
• Receiver range: =12m.
• Internal Rotation system adjusted Angle: 0~180 º.
• Working temperature: -20º~+60?.
• Relay contact loading capacity: 1A/30VDC.
• Waterproof grade: IP54.
• Output Relay: Momentary (whilst the object is present).
• Output Relay Operation: N/O or N/C.
• Size: 128*50*28mm.