Long Range Wireless Water Float Alert

Long Range 800 metre Wireless Water Float Alert System, can be used to monitor rising or falling Water and switch appropriate Control Panels, Auto-Diallers, Buzzers or Sirens.

More details

277,47 € inc VAT

Long Range 800 metre Wireless Water Float Alert System, can be used to monitor rising or falling Water and switch appropriate Control Panels, Auto-Diallers, Buzzers or Sirens.

Supplied with:

 

Float Switch:

Versatile Wired Water Float Switch, can be used to monitor Rising or Falling Water (depending on which way up you mount the bracket).

The Float is supplied with 600 mm of twin bell type cable (which can be lengthened) and would be connected into the Wireless Transmitter.

The bracket can be secured by using the jubilee clip supplied, or mounting holes can be drilled into the plastic bracket.

Wireless Transmitter: 

The Battery Powered Wireless Transmitter is fully weatherproof but is supplied with an additional weatherproof box to give it even more protection. The Float would be connected into the N/O input. In the event of an activation a Wireless Signal would be transmitted up to 800 metre away to the Wireless Receiver.

Wireless Receiver:

The Receiver is powered by a plug in 3-pin transformer and is packed full of useful features including:

  • 4-Channels with unlimited number of Detectors that can be used.
  • Audible Alert: (Classical, Westminster Chime, Ding Dong, Whistle). 
  • Visual Alert.
  • Adjustable Channel 12v Output (often used with wired & wireless sirens).
  • Adjustable 12v Duration: (1 second to 10 minutes).
  • Adjustable Volume.
  • ON/OFF Switch.
  • Adjustable Channel 5 minute Exit Delay.
  • Adjustable Channel Reminder Beep.
  • 4 Output Relays: N/O & N/C (often used with auto-diallers).
  • Easy to Set Up & Operate.
  • 800 metre (line of sight) Operational Wireless Range. 

In the event of rising or falling water, a Wireless Signal would be transmitted by the Transmitter back to this Receiver, this Receiver will chime momentary together with activating a 12v DC Output and N/O or N/C Output Relay.

Please Note: It is important to add a suitable product to this Receiver to alert you to the danger of a potential Water Leak or Flood, the options would normally be:

  • Latched Buzzers.
  • Sirens (wireless or wired).
  • Auto-Diallers.
  • Existing Alarm Control Panels.

Additional Float Switches or Water Detectors can be added to this Water Alarm System, there is no limit.

If you are not sure what components you need to make the system suitable for your applications, then please contact us for Friendly, No Obligation Advice.

 
Available by Mail Order throughout Ireland, or collection from Dublin !!

NEED HELP, THEN PLEASE CONTACT US FOR FRIENDLY, NO OBLIGATION ADVICE:

 

CLICK HERE FOR ULTRA SECURE CONTACT DETAILS !!

  • 1 x Dakota 2500E Wireless Receiver.
  • 1 x Dakota UT-2500E Wireless Transmitter & Battery.
  • 1 x Water Float.
  • 1 x Plastic Box.
  • 1 x Plug in 2 or 3-pin Transformer (for the Receiver).

Wireless Receiver:

  • Power Supply: Plug in 3-pin Transformer (2-pin available upon request).
  • Wireless Range: 800 metres, (this is line of sight, we recommend an additional push button for over 400 metres).
  • Size: 95 (H) x 150 (W) x 35 (D) mm.
  • Available Channels: 4.
  • Maximum Number of Detectors: Unlimited.
  • Volume Control: Yes (off to very high).
  • ON/OFF Switch: Yes.
  • Channel Audible Alerts: 4 (Classical, Westminster Chime, Ding Dong, Whistle).
  • Visual Alert: Yes (four LED Lights).
  • Output Relays: Yes (4).
  • Output Relay Type: (N/O - COM - N/C).
  • Output Relay Rating: 24v DC - 3amp.
  • 12v Out Put: Yes (400mA max).
  • 12v Output Duration: 1 second, 10 seconds, 60 seconds, 10 minutes.
  • 12v Output Channels: 1 - 2 - 3 - 4 (selectable).
  • Delay Exit: 5 minutes (selectable for each channel).
  • Reminder Bleep: Yes (beeps every 15 minutes after an activation if required, selectable).
  • Colour: White.

 

Wireless Transmitter:

  • Size of Push Button & Transmitter: 85 x 50 x 25 mm.
  • Size of Push Button: 20 mm Diameter.
  • Mounting Method of Push Button: Rear Mounting Bracket.
  • Size of Magnet: 50 x 15 x 10 mm.
  • Mounting Method of Magnet: 2 x Screws (included).
  • Power Supply: 1 x CR-2 Lithium Battery (supplied).
  • Battery Life: 12 - 24 months (normal operation).
  • Transmission Range: 800 metres (line of sight but we recommend a seperate push button for distances over 400 metres).
  • Transmission Frequency: 433 Mhz.
  • Programming Method: Internal Dip Switches (very simple).
  • Available Channels: 4.
  • Maximum number of Push Buttons available per System: Unlimited.
  • Input Relays: N/O or N/C.
  • Weatherproof: Yes.

 

Water Float:

  • Output Cable: 600 mm Twin Cable (can be easily lengthened).
  • Output trigger: N/O or N/C.
  • Size: 
    • Bracket: 85 (L) x 35 (H) mm.
    • Float: 25 (D) 25 (H) mm.
  • Max Voltage Rating: 1amp @ 24v DC.
  • Operating Temperature: 90 Degrees Celsius Maximum.
  • Jubilee Clip Size: Up to 70 mm Diameter.

 

Plastic Boxes:

  • Material: Plastic. 
  • IP Rating: IP66.
  • Size: 100 (W) x 100 (L) x 60 (D) mm.

People also bought...

Quick Search

My shopping cart

No products

Shipping 0,00 €
Total 0,00 €

Check out

My account

(Forgot password?)

Newsletter

To receive our news and special offers, please enter your email: