2B Solar Wireless Perimeter Alarm & Dialer System

Solar Powered Wireless Perimeter Security System & Auto-Dialer designed to help you protect your family, home & business, easy to install, 2 sets of dual technology detection beams,100 metre detection range, 900 metres transmission range and packed full of high quality features.


More details

549,85 € inc VAT

This Solar Powered Wireless Perimeter Alarm System is designed to help you protect your family, home and business. It comprises of a set of Detection Beams packed with quality features (listed below), a versatile 4- Channel Indoor Receiver (full details listed below), and a Telephone Auto-Dialer, the beams have a 100 metre detection range, 2 sets of dual detection technology beams (to stops false alarms from insects, small animals etc)  and 900 metres transmission range, the auto-dialer will contact up to 9 key-holders with your own pre-recorded message.

This is a very affodable & versatile Security System.

It works by installing the Beams (additional sets can be added) into a location that you need to protect (the beams can be up to 100 metres away from each other), plug the Indoor Receiver into a standard type wall socket (up to 900 metres away), connected to the indoor receiver is a Telephone Auto-Dialer which needs to be plugged into a standard telephone extension socket. When a vehicle or person passes through the beams the receiver will chime and activate the auto-dialer (and any other accessories connected), the auto-dialer will then contact up to 9 key-holders with your own pre-recorded message. 

The versatile Auto-Dialer is also packed with features:

  • Two personal messages can be recorded (10 seconds long).
  • Up to 9 telephone numbers can be programmed (a maximum of 32 digits).
  • It will call the programmed key-holders up to 3 times or until switched off.
  • Key-holders receiving the call can carry out the following actions:
    • Press * = stop the dialer sequence and built in siren (if selected to ON).
    • Press # = stop the dialer sequence but the siren will continue for the programmed duration.
  • Built in Siren (optional).
  • Adjustable Siren Duration (1 - 99 minutes).
  • Can be used with Siren or Silent (programmable).
  • Dual Trigger.
  • Adjustable entry delay (0 - 60 seconds).
  • Adjustable exit delay (0 - 90 seconds).
  • Back up battery.


  • 4 x Dry Relay Outputs (adjustable channels).
  • 12v DC Outputs (adjustable channels & time duration).
  • ON/OFF Switch & Volume Control.
  • Will work with up to 128 sets of Detectors.
  • Optional Reminder Bleeps.
  • Exit Delay Option.
  • 900 metre Wireless Working Range.


Solar Powered Wireless Detector Beams:

  • Battery Powered with Built in Solar Charging: (making for easy installation).
  • 2 sets of Detection Beams (gives wider protection than single beams).
  • Dual Technology Detecting Beams: (prevents false alarms from small animals and moving debris).
  • Up to 100 metre Detection: (covers more are with less detectors).
  • Impressive 900 metre Wireless Range: (line of sight).
  • Additional Beams Available in Various Sizes: (to suit different locations).
  • Quality Build.
  • Supplied with Wall & Pole Mounting Brackets.
  • Test Lights: (for easy installation).


The unique Perimeter Beams need to be mounted facing each other, they are very easy to install as they have a built in Red Glow Light (for easy lining up) which illuminates for just one hour after switching the beams on, after the hour this light will automatically switch off adding to your security.

The Dual Detection Technology is made up of two detecting beams (60 mm apart), both need to be activated at the same time, before the an alarm signal is sent back to the receiver, this reduces false alarms from small animals, leaves, debris etc.

This system is supplied with a set of beams which includes two sets of 'dual technology' detection beams, these result in a greater protection area, if either of the two sets are beams are triggered the alarm will be activated.   

The 2015 Beams are now supplied with rear mounted Charging Ports which allow the Beams to have the occasional top up charge using a 12v DC transformer, ideal for applications where one or both of the Beams do not get full daylight.  

You can add additional Beams, Sirens & Indoor Receivers to this system.




1 x 4-Channel Indoor Receiver.
1 x Plug in Transformer. 
1 x Rear Mouning Bracket.
1 x Manual. 

Detection Beams:
1 x Set of 2B Solar Powered Detecting Beams.
1 x Set of Wall Mounting Brackets. 
1 x Set of Pole Mounting Brackets.
1 x Set of Instructions. 

1 x Auto-Dialer.
1 x Back up Battery.
1 x Power Transformer (12v DC).
1 x Telephone Cable.
1 x Manual. 


  • Receiver Size: 160 (W) x 105 (H) x 35 (D) mm.
  • Power Supply: 15v DC 1amp (plug in transformer).
  • ON/OFF Button: Yes.
  • Adjustable Volume Control: Yes.
  • Available Channels: 4.
  • Max sets of Beams per Channel: 32.
  • Maximum sets of Detectors per Receiver: 128.
  • Output Voltage: 12v DC.
  • Output Voltage Duration: 1, 10, 60 second & 5 minutes.
  • Built in Chimes: Yes (one per channel).
  • Reminder Bleep: Yes (if programmed).
  • Exit Delay: Yes 5 minutes (if programmed).
  • Frequency: 434.6 MHz.
  • Standby Current: 20 mA.
  • Alarm Current: 180 mA.
  • Relay Rating: 24v DC or 120v AC (2 amp).
  • Wireless Working Range: 900 - 500 metres (line of sight, depending on which detectors are being used).


Detection Beams:

  • Beam Size: 590 (H) x 123 (W) x 45 (D) mm.
  • Power Supply: Re-chargeable AA Batteries.
  • Charging Method: Built in Solar Panels.
  • Mounting Methods: Wall or Pole.
  • Detection Range: 100 metres.
  • Transmission Range: 900 metres (line of sight).
  • Frequency: 433 Mhz.
  • IP Rating: IP66.
  • Distance Between Detection Beams: 60mm.
  • Quantity of Built in Detection Beams: 2 sets.


1) You can pre-record two 10 second personal message.
2) You can program between 1 - 9 telephone numbers into it (up to 32 digits)..
3) Dual trigger options.
4) Two message options (trigger 1 & 2).
5) Built in audible alarm or silent activation (adjustable).
6) Siren Duration Adjustable (1 - 99 minutes).
7) Very versatile telephone software allowing all telephone lines to be used easily. 
8) You can program delay trigger from 0 - 60 seconds.
9) You can program delay exit from 0 - 90 seconds.
9) The system can be used with all types of alarm control panels.
10) You can stop the system sending the voice message to other programmed telephone numbers by pressing * or # on the receiving telephone.
11) Battery back up.
12) Plug in Tranformer Power Supply (supplied).

Easy Programming Method:

  1. Turn On Beams (switch on rear).
  2. Mount the Beams.
  3. Line up By Eye, String Line etc.
  4. Put the relevant Receiver into Learn Mode.
  5. Walk through the Beams, at this time (providing you have them correctly lined up), a bright red glow will illuminate each time (for the first one hour).
  6. The Signal sent to the Receiver from this set of beams will be learned into the relevant receiver.
  7. Take the Receiver out of learn mode.
  8. The system is now ready.

Similar Products

People also bought...

Quick Search

My shopping cart

No products

Shipping 0,00 €
Total 0,00 €

Check out

My account

(Forgot password?)


To receive our news and special offers, please enter your email: