3B Solar Wireless Perimeter Alarm with additional Power Packs

Solar Powered Wireless Perimeter Security System supplied with additional Power Packs (for applications where the Beams need to be being mounted in dark, shady or internal locations) designed to help you protect your family, home & business. 

 

More details

509,95 € inc VAT

This Solar Powered Wireless Perimeter Alarm System is designed to help you protect your family, home and business. It comprises of a set of Detection Beams packed with quality features (listed below) and a versatile 4- Channel Indoor Receiver (full details listed below), the beams have a 100 metre detection range, 3 sets of dual detection technology beams (to stops false alarms from insects, small animals etc)  and 900 metres transmission range.

The unique Rechargeable Power Packs supplied are designed for applications where the Beams have to be mounted in dark, shady or internal applications. The power pack is supplied in an IP67 Plastic Box, and would be connected into the port on the back of the Beams via a cable and jack plug, they will power the Beams for up to 750 activations. When the Power Pack needs charging you simply open the hinged lid of the box, disconnect the snap connector and take the power pack back to the house to charge using the charger supplied. Whilst the power pack is being recharged the Beams would operate normally as they are still being powered by the Internal Batteries. 

This is a very affodable & versatile Security System.

It works by installing the beams (additional sets can be added) into a location that you need to protect (the beams can be up to 100 metres away from each other), and plug the Indoor Receiver into a standard type wall socket (up to 900 metres away), when a vehicle or person passes through the beams the Receiver will chime and activate the any accessory connected into it. The Receiver can have a multide of accessories connected to it (optional) such as Wireless Sirens, Wired Sirens & Auto-Dialers.


Receiver:

  • 4 x Dry Relay Outputs (adjustable channels).
  • 12v DC Outputs (adjustable channels & time duration).
  • ON/OFF Switch & Volume Control.
  • Will work with up to 128 sets of Detectors.
  • Optional Reminder Bleeps.
  • Exit Delay Option.
  • 900 metre Wireless Working Range.

 

Solar Powered Wireless Detector Beams:

  • Battery Powered with Built in Solar Charging: (making for easy installation).
  • 3 sets of Detection Beams (gives wider protection than single & double beams).
  • Dual Technology Detecting Beams: (prevents false alarms from small animals and moving debris).
  • Up to 100 metre Detection: (covers more are with less detectors).
  • Impressive 900 metre Wireless Range: (line of sight).
  • Additional Beams Available in Various Sizes: (to suit different locations).
  • Quality Build.
  • Supplied with Wall & Pole Mounting Brackets.
  • Test Lights: (for easy installation).

 

The unique Perimeter Beams need to be mounted facing each other, they are very easy to install as they have a built in Red Glow Light (for easy lining up) which illuminates for just one hour after switching the beams on, after the hour this light will automatically switch off adding to your security.


The Dual Detection Technology is made up of two detecting beams (60 mm apart), both need to be activated at the same time, before the an alarm signal is sent back to the receiver, this reduces false alarms from small animals, leaves, debris etc.

This system is supplied with a set of beams which includes three sets of 'dual technology' detection beams, these result in a greater protection area, if any of the three sets are beams are triggered the alarm will be activated.   

You can add additional Beams, Sirens & Indoor Receivers to this system.

NEED HELP, THEN PLEASE CONTACT US FOR FRIENDLY, NO OBLIGATION ADVICE:

 

CLICK HERE FOR ULTRA SECURE CONTACT DETAILS !!

Receiver:

  • 1 x 4-Channel Indoor Receiver.
  • 1 x Plug in Transformer. 
  • 1 x Rear Mouning Bracket.
  • 1 x Manual. 

 

Detection Beams:

  • 1 x Set of 3B Solar Powered Detecting Beams.
  • 1 x Set of Wall Mounting Brackets. 
  • 1 x Set of Pole Mounting Brackets.
  • 1 x Set of Instructions.

 

Rechargeable Power Packs:

  • 2 x Rechargeable Power Packs.
  • 2 x 3-pin Plug in Chargers.
  • 2 x IP67 Plastic Boxes.
  • 2 x Snap Cable Connectors.

Receiver:

  • Receiver Size: 160 (W) x 105 (H) x 35 (D) mm.
  • Power Supply: 15v DC 1amp (plug in transformer).
  • ON/OFF Button: Yes.
  • Adjustable Volume Control: Yes.
  • Available Channels: 4.
  • Max sets of Beams per Channel: 32.
  • Maximum sets of Detectors per Receiver: 128.
  • Output Voltage: 12v DC.
  • Output Voltage Duration: 1, 10, 60 second & 5 minutes.
  • Built in Chimes: Yes (one per channel).
  • Reminder Bleep: Yes (if programmed).
  • Exit Delay: Yes 5 minutes (if programmed).
  • Frequency: 434.6 MHz.
  • Standby Current: 20 mA.
  • Alarm Current: 180 mA.
  • Relay Rating: 24v DC or 120v AC (2 amp).
  • Relay Output Type: Momentary N/O or N/C.
  • Wireless Working Range: 900 metres (line of sight).

 

Detection Beams:

  • Beam Size: 840 (H) x 123 (W) x 45 (D) mm.
  • Power Supply: Re-chargeable AA Batteries.
  • Charging Method: Built in Solar Panels.
  • Mounting Methods: Wall or Pole.
  • Detection Range: 100 metres.
  • Transmission Range: 900 metres (line of sight).
  • Frequency: 433 Mhz.
  • IP Rating: IP66.
  • Distance Between Detection Beams: 60 mm.
  • Quantity of Built in Detection Beams: 3 sets.
  • Charging Port: 9 - 12v DC (500 m/A to 1 amp).


Easy Programming Method:

  1. Turn On Beams (switch on rear).
  2. Mount the Beams.
  3. Line up By Eye, String Line etc.
  4. Put the relevant Receiver into Learn Mode.
  5. Walk through the Beams, at this time (providing you have them correctly lined up), a low red glow will illuminate briefly.
  6. The Signal sent to the Receiver from this set of beams will be learned into the relevant receiver.
  7. Take the Receiver out of learn mode.
  8. The system is now ready.

 

Power Pack:

  • Connection to Beams: 90 degrees Push Connector.
  • Cable Length to Push Connector: 1.2 metre (could be lengthened upon request).
  • Charging Method: Remove from IP67 Box (simple connector inside box), and take away to Charge with Charger supplied.
  • Charging Time: Approx 6 - 8 Hours.
  • Beam Operation: Approximately 750 Triggers before Charging required.

 

Storage Box:

  • Material: Plastic.
  • 200 x 170 x 100 mm.
  • Weatherproof: Yes (IP67).
  • Lid: Hinged with Snap Connector.

People also bought...

Quick Search

My shopping cart

No products

Shipping 0,00 €
Total 0,00 €

Check out

My account

(Forgot password?)

Newsletter

To receive our news and special offers, please enter your email: