Delux Battery Smart Alarm Siren & Flashing Strobe Alarm System

For locations with no easy or safe access to a power supply, this Battery Powered Wireless Siren & Flashing Strobe doubles up as the Alarm Control Panel, making it an easy & quick Alarm to install (in any location). Supplied with 2 x Door/Window Contacts, 2 x PIR's, 2 x Remote Controls & 1 x Dummy Siren, can be used as a standard alarm system or as a base to build a more comprehensive system. 

More details

235,15 € inc VAT

For locations with no easy or safe access to a power supply, this Battery Powered Wireless Siren & Flashing Strobe doubles up as the Alarm Control Panel, making it an easy & quick Alarm to install (in any location), operates on 868 Mhz. 

Supplied with 2 x Internal Door/Window Contacts, 2 x PIR's, 2 x Remote Controls & 1 x Dummy Siren, can be used as:

  • A full alarm system (to help protect medium sized buildings with no power, workshops, garages, holiday homes etc).
  • Or as a base to build a more comprehensive system (adding any of the smart alarm detectors, no limit). 


The Alarm is operated using Remote Control (supplied) or additional Remote Controls or Wireless Keypads.

The Internal Wireless Magnetic Door/Window Contacts are designed to help protect all types of opening Door & Windows, supplied in two parts (magnetic contact & magnet), and easily fitted using small screws or double sided tape (supplied).

They are fitted onto the door/window and adjacent frame (towards the hinge end is recommended in most applications), when closed the two halves need to be within 5mm of each other, when the door/window is opened a wireless signal is transmitted to the Alarm Receiver.

Powered by 2 x AAA batteries, which will last between 1 - 2 years in normal operation (depending on use), if a low battery situation arises the built in LED will flash red slowly giving ample indication to change the battery.

The wireless transmission range back to any of the Smart Wireless Alarm Receivers is an impressive 200 metres (line of sight). 

 

The Wireless PIR's, detects people from up to 15 metres distance & 110 degrees, together with a wireless transmission range of 200 metres (line of sight).

Powered by a single PP3 battery (supplied) and supplied with a fully adjustable mounting bracket.

The battery will operate for between 12 - 18 months in most applications (depending on use) and has a built in low battery warning (a slow flashing red LED on the PIR) allowing for suitable battery replacement. The built in power saving technology puts the PIR's into hibernation for 3 minutes after each activation. 

There is no limit to how many additional PIR's can be added to our range of Wireless Smart Alarms.

Mounting the PIR Sensors:
The key to successful operation of any PIR sensor is choosing the correct location. A sensor mounted in a unsuitable location has the potential to cause false triggers and reduce performance. The main rules that should be followed are:
1) Mount the PIR into a corner of a room.
2) Avoid heat spots from bright lamps suddenly turning on or off.
3) Do not install immediately above a radiator.
4) Do not install in a glass roof conservatory.

 

The Wireless Remote Controls, are used for arming and disarming your Wireless Smart Alarm (from up to 50 metres away), they can carry out 5 functions:

  1. Arm: Fully Arms the Alarm System.
  2. Alert: Turns on the Alert Mode (this only turns on the zones that have been programmed to work as an alert).
  3. Home: This Home Arms the Alarm System, (which excludes the alarm zones been programmed to home, this would typically be PIR's inside the building allowing you to arm the doors, but not the internal PIR's for times when you are inside).
  4. OFF: This will disarm the complete Alarm System.
  5. Panic: By pressing the Home & Alert Buttons at the same time, it will fully activate the Alarm Systems (even when the alarm is disarmed), this is very popular for keeping inside the bedroom at night.


The Siren/Control Panel is powered by 4 x D Cell Batteries (supplied), which will last approximately 2 years, makes the installation very quick, easy & safe (optional plug in transformer available for locations that have easy and safe access to a power supply socket).

When activated it has twin Sirens supplying 120 Decibel & bright Flashing Strobe Lights, the duration of these can be adjusted between 1 - 10 minutes during installation.

The Siren has other features including:

  • Tamper Protection.
  • Service Mode (allows customers to silence alarm for any service operations, remote control required).
  • Easy to follow installation instructions.
 
In most applications we would recommend installing the Siren at the front of the property where it is most visible to neighbours, passing police and potential thieves, because there is no need to worry about a power supply (mains versions) or direction of the winter sun (solar versions) this is an easy option. 
 

Also supplied is a matching Dummy Siren Box, normally fitted to the rear of the property !!

 

A full selection of Alarm Accessories can be added to this system including:

  • Internal & External Magnetic Door/Window Contacts (no limit).
  • PIR's (no limit).
  • Remote Controls & Battery Powered Wireless Keypads (a maximum of 99).
  • Battery Powered Wireless Sirens (no limit).
  • Dummy Sirens (no limit).
  • Wireless Vibration Sensors (no limit).
  • Wireless Pressure Mats (no limit).
  • Wireless Water Detectors (no limit).
  • Wireless Smoke Alarm Siren Detectors (no limits).


Available by mail order throughout Ireland or collection from Dublin !!

NEED HELP, THEN PLEASE CONTACT US FOR FRIENDLY, NO OBLIGATION ADVICE:

 

CLICK HERE FOR ULTRA SECURE CONTACT DETAILS !!

  • 1 x Siren, Strobe & Built in Control Panel.
  • 1 x Siren Backing Plate.
  • 4 x D Cell Batteries (for siren).
  • 2 x Magnetic Contacts.
  • 2 x Magnets.
  • 1 x set of mounting screws.
  • 2 x mounting double sided tape (for magnetic contacts).
  • 4 x AAA batteries (for magnetic contacts).
  • 2 x Remote Controls.
  • 2 x PIR's & Adjustable Brackets.
  • 2 x PP3 Batteries (for PIR's).
  • 1 x Dummy Siren.
  • 1 x Manual.

Wireless Siren & Control Panel:

  • Frequency: 868 Mhz.
  • Operational Method: Remote Control or Wireless Keypad (or both).
  • Works with all Wireless Smart Alarm Detectors.
  • Limit of Detectors Used: No Limit.
  • Limit of Remote Controls & Keypads: No Limit.
  • Tamper Switch: Yes.
  • Flashing Strobes: Yes (during activation).
  • Siren Output: 120 Decibel.
  • Power Supply: 4 x D Cell Batteries (supplied).
  • Battery Life: 2 Years (normal operation).
  • Mains Power: Optional Plug in Transformers.
  • Service Mode: Yes (remote control required).
  • Siren Duration: Adjustable in Installation & Service (1 - 10 minutes).

 

Magnetic Door/Window Contacts;

  • Frequency: 868 Mhz.
  • Wireless Transmission Distance: 200 metres (line of sight).
  • Power: 2 x AAA batteries (supplied).
  • Distance required in the closed position: 0 - 5mm.
  • Mounting Method: Screws or Double Sided Tape (supplied).
  • Size of Magnetic Contact: 85 x 40 x 15 mm.
  • Size of Magnet; 53 x 14 x 15 mm.
  • Side of Operation of Switch: Both Sides.
  • Battery Life: 1 - 2 years (normal operation, depending on usage).
  • Low Battery Warning: Yes (slow red flashing LED on the magnetic contact).
 
PIR's:
  • Frequency: 868 Mhz.
  • Detection Distance: adjustable from 4 - 6 - 15 metres.
  • Detection Angle: 110 Degrees.
  • Power Supply: 1 x PP3 Battery.
  • Transmission Range: 200 metres (line of sight).
  • Mounting Method: Adjustable Wall Bracket (using 2 screws).
  • Power Saving: Yes (set to 3 minutes between activations).
  • Low Battery Warning: Yes (low flashing red LED when the battery is needing replacement).

 

Remote Controls:

  • 5 modes of Operation 
    • Arm: Fully Arms the Alarm System.
    • Alert: Turns on the Alert Mode (this only turns on the zones that have been programmed to work as an alert).
    • Home: This Home Arms the Alarm System, (which excludes the alarm zones been programmed to home, this would typically be PIR's inside the building allowing you to arm the doors, but not the internal PIR's for times when you are inside).
    • OFF: This will disarm the complete Alarm System.
    • Panic: By pressing the Home & Alert Buttons at the same time, it will fully activate the Alarm Systems (even when the alarm is disarmed), this is very popular for keeping inside the bedroom at night.
  • Frequency: 868 Mhz.
  • Power Supply: 1 x 12v Battery (MN27)
  • Size: 58 x 31 x 12 mm.
  • Operating Distance: 50 metres (line of sight).
  • Max Number of Remote Controls Per Alarm System: 99.

 

Dummy Siren:

  • Size: 260 (h) x 250 (w) x 50 (d) mm.
  • Colour: Red
  • Mounting Holes: 4


People also bought...

Quick Search

My shopping cart

No products

Shipping 0,00 €
Total 0,00 €

Check out

My account

(Forgot password?)

Newsletter

To receive our news and special offers, please enter your email: