KP Alarm Wireless Gate Contact Kit.

Wireless Gate Contact Kit, designed to help secure an external gate (40 - 100 metres away), working in conjunction with the Heavy Duty Wireless GSM Alarm System.

More details

E005-0550

41,56 € inc VAT

Battery Powered, Wireless Gate Contact Kits, designed to help secure an external gate, working in conjunction with our Heavy Duty Wireless GSM Alarm System.

The gate can be located up to 100 metres away from the alarm receiver (with no obstructions), with typical obstructions 30 - 50 metres would be more realistic (further distance can be achieved if a wireless signal repeater (E005-0760) can be located between the gate and receive. This Wireless Gate Kit, can also be used in detached buildings which are susceptible to damp conditions.

The magnetic switch is normally fitted onto the gate post with the magnet being fitted onto the actual gate, the switch is connected to the battery powered transmitter & weatherproof box by 300 mm of cable sleeved in a steel protected cover, should the cable be cut the alarm would be triggered. 

You can program these gate contacts into the 11 available normal alarm zones on the Heavy Duty Wireless GSM Alarm System, or group them together and utilize as many contacts as you will ever need (no limit). You could also utilize one of the 5 emergency wireless zones for gates that would not often be opened (perhaps protecting a boat, trailer or caravan).

NEED HELP, THEN PLEASE CONTACT US FOR FRIENDLY, NO OBLIGATION ADVICE:

 

CLICK HERE FOR ULTRA SECURE CONTACT DETAILS !!

  • 1 x Battery Powered Transmitter.
  • 1 x Steel Contact.
  • 1 x Magnetic Switch.
  • 1 x Lithium Battery.
  • 1 x Weatherproof Box.
  • 4 x Mounting Screws.
  • Magnetic Switch Size: 105 (L) x 37 (W) x 10 (D) mm.
  • Magnet Size: 105 (L) x 15 (W) x 16 (D) mm.
  • Internal Transmitter Size: 70 (L) x 35 (W) x 15 (D) mm.
  • Armoured Cable Length (between the Transmitter & Switch): 300 mm.
  • Weatherproof Box Size: 110 (W) x 110 (W) x 55 (D) mm.
  • Power Supply: 1 x 12v MN21
  • Battery Life: 12 - 18 months (depending on use).


Installation Method:

  1. Fit the magnetic switch onto a gate frame.
  2. Fit the magnet onto the gate (both the magnet and switch need to be nearly touching when the door is closed).
  3. Place the battery powered transmitter into the weatherproof box.
  4. Mount the weatherproof box.



Similar Products

People also bought...

Quick Search

My shopping cart

No products

Shipping 0,00 €
Total 0,00 €

Check out

My account

(Forgot password?)

Newsletter

To receive our news and special offers, please enter your email: