3B Solar Powered Detector Beams

Solar Powered Wireless Perimeter Detector Beams with 3 sets of Dual Detection Technology Beams, 100 metre Detection & 900 metre Transmission.

More details


311,95 € inc VAT

These impressive Solar Powered Perimeter Beams are packed with impressive features (listed below) and will work in conjunction with either of the Receivers (indoor E004-2790) & (solar outdoor E004-2810), perfect for protecting the outside of homes, farms & businesses:

  • Battery Powered with Built in Solar Charging: (making for easy installation).
  • Three sets of Detection Beams: (gives a wider protection area than one).
  • Each Detecting Beam is working with Dual Detection Technology: (prevents false alarms from small animals and moving debris).
  • 100 metre Detection: (covers more are with less detectors).
  • Impressive 900 metre Wireless Range: 
  • Quality Build.
  • Supplied with Wall & Pole Mounting Brackets.
  • Test Lights: (for easy installation).


These unique Perimeter Beams are very easy to install as they have a built in Red Glow Light (for easy lining up) which illuminates for just one hour after switching the beams on, after the hour this light will automatically switch off adding to your security.

The Dual Detection Technology is made up of two detecting beams (60 mm apart), both need to be activated at the same time, before the an alarm signal is sent back to the receiver, this reduces false alarms from small animals, leaves, debris etc.

The 2015 Beams are now supplied with rear mounted Charging Ports which allow the Beams to have the occasional top up charge using a 12v DC transformer, ideal for applications where one or both of the Beams do not get full daylight.  




  • Beam Size: 840 (H) x 123 (W) x 45 (D) mm.
  • Power Supply: Re-chargeable AA Batteries.
  • Charging Method: Built in Solar Panels.
  • Mounting Methods: Wall or Pole.
  • Detection Range: 100 metres.
  • Transmission Range: 900 metres (line of sight).
  • Frequency: 433 Mhz.
  • IP Rating: IP66.
  • Distance Between Detection Beams: 60mm.
  • Number of Beams: 3 sets.

Easy Programming Method:

  1. Turn On Beams (switch on rear).
  2. Mount the Beams.
  3. Line up By Eye, String Line etc.
  4. Put the relevant Receiver into Learn Mode.
  5. Walk through the Beams, at this time (providing you have them correctly lined up), a bright red glow will illuminate each time (for the first one hour).
  6. The Signal sent to the Receiver from this set of beams will be learned into the relevant receiver.
  7. Take the Receiver out of learn mode.
  8. The system is now ready.

1 x Set of Solar Powered Detecting Beams.
1 x Set of Wall Mounting Brackets. 
1 x Set of Pole Mounting Brackets.
1 x Set of Instructions. 

Similar Products

People also bought...

Quick Search

My shopping cart

No products

Shipping 0,00 €
Total 0,00 €

Check out

My account

(Forgot password?)


To receive our news and special offers, please enter your email: